Skip to main content

Instruments & Voices

Tubular Bells (Chimes)

Definition

Tubular bells, or chimes, are tuned metal tubes hung in a frame and struck near the top with a mallet. They stand in for church bells in orchestras and bands; a standard set spans C4 to F5.

Tubular bells, often called chimes, are a set of tuned metal tubes, usually brass or steel, hanging from a tall frame. The tubes are laid out like a piano keyboard in two rows: those for the "white keys" in front and those for the "black keys" behind and slightly higher. The player stands and strikes each tube near its top edge with a hammer-shaped mallet, usually with a plastic, wood or leather-covered head.

A substitute for church bells

Real church bells are far too big for a theater: the largest weigh 20 tons or more. In the 19th century, instrument makers looked for a portable bell sound for opera and orchestral music, and tubular bells became the standard answer. They are still used for tolling bells, clock chimes and festive peals, and composers also value their own deep, shimmering color.

The pedal

A foot pedal controls a damper bar, much like a piano's sustain pedal, so the player can let the tubes ring or stop them all at once. Single notes can also be stopped by hand. With the pedal held through several notes, the sound quickly blurs, because each tube rings for a long time.

Range and notation

Chimes are written in treble clef at sounding pitch. A standard set of 18 tubes covers C4 to F5, a chromatic octave and a half; larger sets start lower, at F3 or E♭3.

A treble staff with two whole notes: C4 on a ledger line below the staff, labeled C4, and F5 on the top line, labeled F5.
A standard set of 18 tubes, from C4 (middle C, on a ledger line below the treble staff) up to F5 (top line). Chimes sound as written. Larger sets start lower.

The written note is the pitch you hear in the bright attack, the "strike note". The ringing sound that follows also contains a strong tone an octave lower, along with many overtones, so listeners sometimes disagree about which octave a chime is in. Because of all that ringing, chimes suit single notes and slow tunes better than fast lines.

A common confusion

Tubular bells are not the "orchestra bells" of a band score. That name means the glockenspiel, which has small metal bars and sounds much higher. In the percussion section, chimes are the tall rack of tubes.

Common questions

Are tubular bells and chimes the same thing?

Yes. "Tubular bells" and "chimes" (or "orchestral chimes") are names for the same rack of tuned metal tubes. Do not confuse them with "orchestra bells", which is another name for the glockenspiel.

Do tubular bells transpose?

No. Chimes are written at the pitch of their strike note, in treble clef. The ringing sound also contains a strong tone an octave lower, which is why some listeners hear them in a lower octave than written.

Was this entry helpful?

Comments