Music Production
Effects Pedal (Stompbox)
An effects pedal, or stompbox, is a small box placed on the floor between an instrument and its amplifier that changes the sound, with an effect such as distortion, delay or chorus, and is switched on and off with the foot.
An effects pedal sits in the cable between an electric guitar (or a bass, a keyboard or another instrument) and the amplifier. The instrument plugs into the pedal's input jack, and a second cable runs from its output jack to the amp. Stepping on the footswitch turns the effect on or off, so you can change sound in the middle of a song without taking your hands off the instrument.
Kinds of pedals
- Drive: overdrive, distortion and fuzz.
- Dynamics: compressors and noise gates.
- Filters: wah, which you rock back and forth with your foot, and other filter and EQ pedals.
- Modulation: chorus, flanger, phaser, tremolo and vibrato.
- Time-based: delay and reverb.
- Utility: tuners, volume pedals and loopers.
A multi-effects unit puts many of these in one floor box, with stored presets.
The order of the chain
Pedals are connected one after another, and the order changes the sound. There is no single correct order, but a common starting point is:
- a tuner first, so it hears the plain signal;
- filters such as wah, then a compressor;
- overdrive and distortion;
- modulation: chorus, flanger, phaser;
- a volume pedal;
- delay and reverb last, so the echoes and space apply to everything before them.
Move one pedal at a time and listen: delay before distortion sounds very different from distortion before delay. A software chain of plugins on a mixer channel follows the same logic.
Power, bypass and boards
Many compact pedals run on a 9-volt battery or a DC power adapter, but the voltage, plug polarity and current draw differ between models, so check what each pedal needs before connecting a shared power supply. When a true-bypass pedal is off, the signal passes straight through it; a buffered pedal keeps a small amplifier stage in the signal path even when it is off. A guitar with ordinary passive pickups loses some treble over long cable runs, and a buffer can help to prevent that. Players argue about the trade-offs, and both designs are common.
Players often fix their pedals to a flat board with a shared power supply and short patch cables, a pedalboard. On a pipe organ the pedalboard is something else entirely: the keyboard played with the feet.
A short history and a common confusion
Gibson's Maestro Fuzz-Tone of 1962 is often named as the first commercially sold effects pedal. The BOSS CE-1 Chorus Ensemble of 1976 put the stereo chorus of Roland's JC-120 amplifier into a floor unit.
"Pedal" means several things in music. An effects pedal processes sound electronically. A keyboard's sustain pedal is a switch that holds notes, and an expression pedal is a rocking pedal that moves one setting smoothly, such as volume or wah.
Common questions
What order should guitar pedals go in?
There is no single correct order. A common starting point is tuner, then wah and compressor, then overdrive and distortion, then modulation such as chorus, then volume, with delay and reverb last. Change one position at a time and listen.
What is the difference between true bypass and buffered pedals?
When a true-bypass pedal is off, the signal passes straight through. A buffered pedal keeps a small amplifier stage in the path, which can stop a passive guitar losing treble over long cables. Both are common.
Comments