Skip to main content

Music Production

Phaser

Definition

A phaser is an audio effect that passes a copy of a sound through a chain of phase-shifting filters and mixes it with the original. This cuts a few notches in the spectrum, which an LFO sweeps up and down for a swirling sound.

A phaser splits the signal in two. One path is left alone. The other passes through a chain of all-pass filters: stages that let every frequency through at the same level but shift its phase by an amount that depends on the frequency. Wherever the shifted copy ends up exactly opposite the original, the two cancel when they are mixed, cutting a notch in the spectrum. An LFO moves the frequencies at which the stages work, so the notches sweep up and down.

Stages and notches

In the classic analog design, two all-pass stages make one notch. Many well-known guitar phasers use four stages, which give two moving notches; others offer six, ten or more stages, for three, five or more notches, and some let you choose. A phaser's notches are few and unevenly spaced, while a flanger makes a long comb of evenly spaced notches. That is why the two sound related but different: a phaser swirls, a flanger whooshes.

The controls

  • Rate and depth: how fast and how far the notches sweep.
  • Feedback (or resonance): feeds part of the output back in, which heightens the notches and makes the sweep more pronounced.
  • Stages, on some units: more stages give more notches and a thicker effect.
  • Mix: as with any of these effects, the notches only appear when the shifted copy is mixed with the dry sound.

Where you hear it

Phasing started life as a guitar effect and remains common as a pedal (effects pedal), but it also suits pianos, synth pads and drum loops. The Uni-Vibe, one of the earliest and most famous phaser pedals, sweeps its stages with light-sensitive resistors around a pulsing lamp. It was meant to imitate a rotating speaker and ended up with a smooth, watery sound of its own, heard on some of Jimi Hendrix's gentler songs.

Three kinds of "phase"

  • Phase and polarity. Phase is a wave's position in its cycle, and polarity is its positive or negative orientation. A phase problem between two microphones is a fixed coloration or cancellation that you usually want to fix. A phaser creates moving cancellation on purpose.
  • Phasing in minimalism. Steve Reich's phasing (minimalism) is a way of composing: two performers or recordings play the same pattern, and one gradually pulls ahead of the other. It is a musical process, not an audio effect.
  • Tape phasing. The two-tape-machine trick behind the flanger was also called phasing, so older writing uses the words loosely.

Common questions

What does a phaser pedal do?

It mixes your signal with a copy passed through phase-shifting filters, which cancels a few narrow bands of frequencies. A slow oscillator sweeps those notches up and down, giving a swirling, whooshing movement.

Is a phaser the same as Steve Reich's phasing?

No. A phaser is an audio effect. Reich's phasing is a compositional process in which two players or recordings repeat the same pattern and one slowly pulls ahead of the other (minimalism).

Was this entry helpful?

Comments