Instruments & Voices
Amplifier (Guitar Amp)
A guitar amplifier, or amp, makes the small electrical signal from an electric guitar's pickups loud enough to hear through a speaker. Its preamp, tone controls and power amp also shape the sound, from clean to distorted.
An electric guitar makes very little sound on its own. Its pickups turn the vibrating strings into a tiny electrical signal, and the amplifier does the rest: it boosts the signal and drives a speaker. A guitar amp is more than a loudspeaker, though. It changes the tone on purpose, and the same guitar sounds and even feels different through different amps, so guitarists treat the amp as part of the instrument.
Preamp, power amp and speaker
Every guitar amp has three sections:
- The preamp takes the weak signal from the guitar and makes it stronger in one or more gain stages, built with vacuum tubes or transistors. It also shapes the sound: almost every knob on the front panel, from gain and the bass, middle and treble controls to the volume, works on the preamp. Turned up, the gain pushes the preamp into distortion on purpose; many amps have separate clean and overdriven channels, and some have built-in effects such as reverb.
- The power amp makes a much larger copy of that signal, strong enough to drive a speaker.
- The speaker turns the signal into sound. Practice amps for home use have small speakers, about 4 to 8 inches across; most professional guitar amps use 12-inch speakers, and a bigger cabinet gives a fuller low end.
Combo or head and cabinet
A combo amp puts the preamp, power amp and speaker in one box. It is the most popular kind, because it is easy to carry and set up. For big venues, players often split the amp in two: an amp head holds the preamp and power amp, and a separate speaker cabinet holds the speakers. A head on one cabinet is a half stack; on two, a full stack.
Tubes, transistors and modeling
- Tube (valve) amps use vacuum tubes, an older technology that guitarists still prize for the pleasing way its small imperfections color the sound.
- Solid-state amps use transistors. They are smaller and lighter and can sound good at low volume.
- Modeling amps use digital processing to imitate many different amps and effects in one box, which makes them popular for practice and recording.
A common confusion
The gain and the volume are different controls. Gain sets how hard the preamp is driven, and with it how clean or distorted the sound is; the master volume sets how loud the result comes out. Turn the gain up and the volume down for a distorted sound at a quiet level. A bass guitar usually plays through a bass amp, a related but separate design with larger or more speakers, built for its lower notes.
Between the guitar and the amp, many players add effects pedals.
Common questions
What is the difference between a combo amp and an amp head?
A combo amp has the amplifier and the speaker in one box. An amp head contains only the amplifier (preamp and power amp) and needs a separate speaker cabinet; a head on a cabinet is called a stack.
Do I need a big amp to practice at home?
No. Practice amps made for home use are small, with speakers about 4 to 8 inches across. Solid-state amps in particular can sound good at low volume, while bigger amps and stacks are built to fill large venues.
Comments