Skip to main content
Back
Cover image for the The Best Plugins for Ableton Live 12: What Live Already Does, and the Free and Paid Plugins Worth Adding blog article

The Best Plugins for Ableton Live 12: What Live Already Does, and the Free and Paid Plugins Worth Adding

Ableton Live 12 comes with an EQ, a compressor, a saturator, a reverb, a delay, a limiter and at least one synth in every edition, so you can finish a whole track without buying a single plugin. Plugins earn their place when they do a job that your edition of Live does not do, or does in a way that slows you down. This guide goes job by job: first the Live device you already have, then a free plugin and, where one earns its price, a paid plugin worth adding, each with real screenshots, honest pros and cons and a setting to try first. Prices and versions are as of November 2026. Ableton has announced Live 13 for early 2027, with these devices in the same editions; this guide describes Live 12.

How Live 12 handles plugins

Live 12 loads three plugin formats: VST2, VST3 and, on macOS only, Audio Units (versions 2 and 3). CLAP isn't on the list in Ableton's manual, so when a developer offers several formats, install VST3 on Windows and VST3 or AU on a Mac. Every plugin in this guide comes in those formats.

First, tell Live where to look. Open Settings with Ctrl+, (Windows) or Cmd+, (Mac), go to the Plug-Ins tab and find Plug-In Sources. VST3 plugins install to one standard system folder, so switch on Use VST3 Plug-In System Folder. Older VST2 plugins on Windows need Use VST Plug-In Custom Folder and a Browse to the folder you installed them in; on a Mac, switch on Use Audio Units if you want AUs. After installing something new while Live is open, press Rescan on the same tab. Holding Alt (Option on a Mac) while you press Rescan deletes Live's plug-in database and runs a clean scan, which the manual suggests when that database seems to be corrupted.

Plugin instruments go on MIDI tracks; plugin effects go on audio tracks or after an instrument. The Show/Hide Plug-In Window button in the device title bar opens the plugin's own interface.

Diagram of a Live 12 Set: a MIDI track feeds an instrument and then audio effects into its fader and sends; an audio track feeds audio effects only; dashed sends feed Return A with a reverb and Return B with a delay, both 100 percent wet; every track and return meets at the Main track, where a limiter and then a meter come last

Where plugins sit in a Live Set. The manual's rule: instruments only on MIDI tracks, effects on audio tracks or after an instrument. Returns hold shared effects at 100% wet, and the limiter goes last on Main, with only a meter after it.

Plugins cost processing power. When the CPU meter climbs, right-click a track and choose Freeze Track (Ctrl+Alt+Shift+F, or Cmd+Option+Shift+F): Live renders the track to audio and plays that back, and you can unfreeze it to edit again. When you're sure a part is finished, Bounce Track in Place turns it into a plain audio track. Since Live 12.2 that command replaces the old Freeze and Flatten. If you still hear crackles, our guide to fixing latency, crackles and bad exports covers buffer sizes.

Job by job: what Live has, and what to add

EQ: EQ Eight, TDR Nova and FabFilter Pro-Q 4

Every edition has Channel EQ and EQ Three; Standard and Suite add EQ Eight, an eight-band parametric EQ with its own spectrum display. Our stock-device mixing walkthrough shows it at work.

Live 12.4.15 EQ Eight with band 3 selected: a broad bell at 300 Hz, minus 3 dB, Q 1.00, shown as a shallow dip in the cyan curve; Adaptive Q is off and the output reads 0.00 dB

EQ Eight in Live 12.4.15, from our mixing article: one band, a 3 dB cut at 300 Hz with Q 1. It cuts by the same amount all the time, loud passage or quiet.

TDR Nova (Tokyo Dawn Labs, version 2.2.3, free) looks like a normal EQ, but each of its four bands can also act as a compressor for its own frequency range. Give a band a threshold and it cuts only when that range gets loud, then lets go. That is useful for a voice or guitar that turns boomy on certain notes.

TDR Nova 2.2.3 with band II selected at 299 Hz, Q 1.00, gain 0.0 dB, threshold minus 20.0 dB and ratio 3.0:1; a shaded dip around 300 Hz shows the band cutting while the loop plays, and the high-pass filter is on at 40 Hz, 24 dB per octave

TDR Nova 2.2.3 with one dynamic band: threshold −20.0 dB, ratio 3.0:1, gain left at 0.0 dB. The shaded area around 299 Hz is the cut the band is making while the loop plays.

  • Pros: free, with a dynamic section on every band, a high-pass and low-pass filter and a spectrum analyzer; VST2, VST3 and AU.
  • Cons: four bands (the paid Gentleman's Edition adds more), and dynamic EQ takes a little practice: start with one band and listen with it bypassed and back on.

FabFilter Pro-Q 4 (version 4.13, $199 list price, 30-day full trial) is the paid step up: up to 24 bands, dynamic EQ on any bell or shelf band, a spectral dynamics mode, EQ matching and a choice of zero-latency, linear-phase or Natural Phase processing. To start, drag the yellow line in the display or double-click anywhere to create a band; you can also grab a peak in the analyzer itself, which FabFilter calls Spectrum Grab.

FabFilter Pro-Q 4 (version 4.13, trial) with three bands over a playing loop: a green low-cut node at 40 Hz, a blue bell node cutting 3 dB near 300 Hz and a purple high-shelf node raising 2 dB from about 8 kHz; the analyzer is set to Pre+Post and the mode reads Zero Latency

FabFilter Pro-Q 4 (version 4.13, trial): a 40 Hz low cut, a −3.00 dB bell near 300 Hz and a +2.00 dB high shelf from about 8 kHz, over the spectrum of the loop.

  • Pros: up to 24 bands over a large analyzer, and its three processing modes cover mixing and mastering jobs in one plugin.
  • Cons: $199 is a lot if EQ Eight already does what you need; the trial opens an evaluation panel every session.

Compression: Compressor, Glue Compressor, TDR Kotelnikov and Xfer OTT

Compressor is in every edition. Standard and Suite add Glue Compressor (modeled, Ableton says, on a classic 1980s console bus compressor) and Multi-band Dynamics, so Standard and Suite owners already have three compressors.

Live 12.4.15 Compressor with ratio 3.00:1, attack 20.0 ms and release 100 ms outlined, and threshold minus 24.0 dB outlined in the display; RMS mode, Makeup off, Dry/Wet 100 percent

Live's Compressor in Live 12.4.15, from our mixing article, with a starting setting for a lead: 3:1, 20 ms attack, 100 ms release, threshold −24 dB.

TDR Kotelnikov (Tokyo Dawn Labs, 1.6.7, free) is a wideband compressor that its developer calls perfectly suited to stereo bus compression. It has separate release times for sudden peaks and for the overall level, a sidechain high-pass filter so low frequencies drive it less, and a Delta button that lets you hear only what it removes.

TDR Kotelnikov 1.6.7 with threshold minus 24.0 dB and ratio 2.0:1, attack 6.0 ms, release peak 80 ms and release RMS 220 ms; the gain reduction meter's bright bar reaches just under 2 dB while audio plays; the Delta button is outlined

TDR Kotelnikov 1.6.7 on a playing loop: threshold −24.0 dB at 2.0:1. The bright bar of the meter reaches just under 2 dB of gain reduction: a light setting for a bus.

  • Pros: free; independent peak and RMS release; Delta preview; bypass without clicks; VST2, VST3 and AU.
  • Cons: its controls (Peak Crest, two release knobs) work differently from Glue Compressor's, so read the manual first; one wideband compressor only, with no multiband mode.

Xfer OTT (Xfer Records, 1.37, free) splits the sound into high, mid and low bands and compresses each one both ways at once: loud parts down and quiet parts up.

Graph of output level against input level with an upper threshold at minus 20 dB and a lower threshold at minus 40 dB: above the upper one the cyan curve bends down, so loud parts come down; below the lower one it bends up, so quiet parts come up; in between it follows the unchanged diagonal

Downward and upward compression, drawn from the formulas with 3:1 in both directions. Live's Multi-band Dynamics (Standard and Suite) can do both in up to three bands; OTT does both in three bands with fewer controls.

In OTT, one knob decides how much of this you get: Depth, which scales the amount of compression in all three bands. Here it is at the default and at 30%.

Two Xfer OTT 1.37 windows side by side on a playing loop: on the left Depth 100 percent, the default; on the right Depth 30 percent; Time 100 percent, gains 0.0 dB and Upward and Downward 100 percent in both; the high, mid and low band meters move in both

Xfer OTT 1.37 at its default Depth of 100% (left) and at 30% (right), with everything else unchanged.

  • Pros: free and quick to use, with a few main controls (Depth, Time, In Gain and Out Gain); VST3 and AU.
  • Cons: at the default 100% the effect is strong, so set Depth by ear (try well below 100% and compare); Xfer publishes only release notes, no manual. Standard and Suite owners already have the same idea in Multi-band Dynamics.

Saturation and tape: Saturator, ChowTapeModel and FabFilter Saturn 2

Saturator is in every edition, Standard and Suite add Dynamic Tube, and Suite adds Roar, which can saturate three bands separately. Saturator alone covers a lot: Ableton's manual describes it as waveshaping that adds "dirt, punch or warmth". If you want a dedicated tape-machine model, with wow, flutter and tape wear, add a plugin.

ChowTapeModel (Chowdhury DSP's Chow Tape Model, 2.11.4, free and open source) is a physical model of a reel-to-reel tape machine, originally based on a Sony TC-260. Its tabs cover drive, compression, tone, tape wear and the speed wobble called wow and flutter. A first move: leave the rest at its defaults and raise Drive on the Tape tab a little at a time; it sets how hard the signal is pushed into the tape model.

ChowTapeModel 2.11.4 with Drive raised to 0.70 and Saturation and Bias at 0.50; tabs for Tape, Comp and Tone, for Loss, Degrade and Chew, and for Flutter and Wow are outlined; the bottom bar reads Oversampling 2x

ChowTapeModel 2.11.4 with Drive raised from 0.50 to 0.70. Its title bar and level meters are cropped off the top.

  • Pros: free (GPLv3), in VST, VST3, AU, AAX, CLAP and more; drive, wow, flutter and wear controls in one plugin.
  • Cons: settings such as gap and spacing in microns assume you know tape machines; the newest release, 2.11.4, dates from November 2023.

FabFilter Saturn 2 (2.13, $149 list, 30-day trial) has 28 distortion styles, from subtle tube and tape to guitar amps and bit crushing.

FabFilter Saturn 2 (version 2.13, trial) with one band in Warm Tape style, Drive 30.0 percent and Mix 100 percent; the spectrum of the playing loop is drawn above the controls

FabFilter Saturn 2 (version 2.13, trial): one band, Warm Tape style, Drive 30.0%. Split into bands to saturate only the low end, for example.

  • Pros: up to six bands, each with its own style, drive, tone and dynamics, plus drag-and-drop modulation; among Live's saturators only Roar (Suite) splits a sound into bands, and it has three.
  • Cons: $149; with one band and a gentle style it overlaps with Saturator, and Suite owners already have three-band saturation with a modulation matrix in Roar.

Reverb and delay: Reverb, Delay, Valhalla Supermassive and FabFilter Timeless 3

Reverb and Delay are in every edition; Suite adds Echo and Hybrid Reverb. A common setup is to put them on return tracks and send each track to them; the manual's advice for Delay, Echo and Hybrid Reverb on a return is Dry/Wet at 100%.

Live 12.4.15 Reverb on Return A with Predelay 15.0 ms, Decay 800 ms and Dry/Wet 100 percent outlined

Live's Reverb in Live 12.4.15 on a return track, from our mixing article: 15 ms predelay, 800 ms decay, Dry/Wet 100%.

Valhalla Supermassive (Valhalla DSP, 5.0.0, free, no account needed) is built for huge reverbs and echoes, with 22 modes. Valhalla's own tip for the Gemini mode: Density at maximum and Warp at 50% or more for smooth reverbs.

Valhalla Supermassive 5.0.0 set for a return track: Mix 100.0 percent, Delay 300.0 ms, Warp 50.0 percent, Feedback 60.0 percent, Density 100.0 percent, mode Gemini

Valhalla Supermassive 5.0.0 set up for a return: Mix 100.0%, Warp 50.0%, Density 100.0%, mode Gemini, following Valhalla's suggestion for smooth Gemini reverbs.

  • Pros: free; 22 modes cover echoes, swells and long tails; clicking the MIX label locks the mix, so presets don't change it on a return.
  • Cons: each mode behaves very differently, so expect to audition several; the EQ is only a high and a low cut.

FabFilter Timeless 3 (3.10, $149 list, 30-day trial) is a tape-style delay with up to 16 taps, up to six filters, ducking and a large modulation system.

FabFilter Timeless 3 (version 3.10, trial) with Mix at 100 percent for a return track: delay 350.0 ms left and 353.5 ms right, Feedback 35 percent, two filters on the repeats, and Drive, Lo-Fi, Diffuse, Dynamics and Pitch controls

FabFilter Timeless 3 (version 3.10, trial) with Mix raised to 100% for a return track; the 350 ms delay and 35% feedback are its defaults.

  • Pros: filters, drive and modulation on the repeats in one window; tape-style or smooth behavior when you change the delay time.
  • Cons: $149, and Suite owners already have Echo, modeled on classic analog and digital delays.

To match delay times to your song, our tempo math worksheet turns a note value at any BPM into milliseconds.

Limiting and loudness: Limiter, Youlean Loudness Meter 2 and FabFilter Pro-L 2

Limiter is in every edition and has a True Peak mode. The manual's advice: make it the last device on the Main track and do not raise the Main fader above 0 dB.

Live 12.4.15 Main track with Utility followed by Limiter: Input 0.0 dB with Maximize off, Ceiling minus 1.0 dB, lookahead 3 ms and True Peak mode outlined

Live's Limiter in Live 12.4.15, from our mixing article: ceiling −1 dB, True Peak mode, 3 ms lookahead.

What Live's meters don't give you is loudness in LUFS: the manual describes them as peak and RMS meters. Youlean Loudness Meter 2 (Youlean, 2.5.15, free edition) fills that gap. Put it after the limiter on Main and play the whole song.

Youlean Loudness Meter 2 (version 2.5.15, free edition) while a loop plays: short term minus 21.8 LUFS, integrated minus 21.4 LUFS, loudness range 0.7 LU, true peak max minus 4.2 dB, with a loudness history graph and the DEFAULT preset

Youlean Loudness Meter 2 (version 2.5.15, free edition) after a few seconds of a loop: integrated −21.4 LUFS, true peak max −4.2 dB.

  • Pros: free forever, with integrated, short-term and momentary loudness, loudness range and true peak; VST2, VST3 and AU, and a standalone app.
  • Cons: it only measures and never changes the audio; the streaming-service presets are in the paid PRO edition ($49 list).

FabFilter Pro-L 2 (2.26, $199 list, 30-day trial) is a true-peak limiter with eight limiting styles, up to 32x oversampling and its own loudness metering.

FabFilter Pro-L 2 (version 2.26, trial) on a playing loop: Gain plus 2.0 dB, output minus 1.0 dBTP, True Peak Limiting on; the display draws the level of the loop as gray peaks

FabFilter Pro-L 2 (version 2.26, trial): +2.0 dB of gain into a −1.0 dBTP ceiling with True Peak Limiting on. The output peaks at −3.2 dB, so the limiter is not reducing anything yet.

  • Pros: several limiting styles to compare; the Unity Gain option plays the result at the original level, so you judge the limiting and not just the extra loudness.
  • Cons: $199, and Live's Limiter already has a true-peak ceiling.

Synths: Drift and Surge XT

Drift is in every edition of Live 12, Standard adds Analog, and Suite adds Wavetable, Operator and Meld. Our Wavetable and Drift sound design guide builds a bass, lead and pad with them, and our synth waveforms handout shows the harmonics inside a saw like the one below.

Live 12.4.15 Drift with Oscillator 1 on a saw at minus 6 dB and its filter-routing arrow on, and the filter set to Type II at 600 Hz, resonance 0.10, high-pass 10 Hz

Drift in Live 12.4.15, from our sound design article: one saw through a low-pass filter.

Surge XT (Surge Synth Team, 1.3.4, free and open source) is a free synth worth adding, especially if your edition lacks Wavetable. It has three oscillators per scene with 12 oscillator types, two filters, many effect types and more than 2,800 patches.

Surge XT 1.3.4 playing a C major chord on the Init Saw patch: the patch browser, Oscillator 1 set to Classic, Filter 1 and Filter 2 both Off, the filter and amp envelopes, the modulation sources and the LFO 1 editor are outlined

Surge XT 1.3.4 on its Init Saw patch. Step through the factory patches with the Category and Patch arrows before you build your own.

  • Pros: free (GPL-3.0); a huge preset library; VST3 and AU.
  • Cons: one dense window shows oscillators, filters, envelopes and modulation at once, which is a lot on a laptop screen (there is a Zoom button).

Piano: Live's piano Packs and Pianoteq

Standard and Suite include the sampled Grand Piano Pack, and Suite adds an Upright Piano Pack. Intro has no dedicated piano Pack on Ableton's comparison page.

Pianoteq (Modartt, 9.3.1) models the piano instead of playing back recordings, so the download is about 50 MB. Pianoteq 9 Stage costs $139 with two instrument packs; Standard ($269) and PRO ($399) let you change the physical model itself. The free trial has every feature, but eight notes are silent and it must be restarted every 20 minutes. Before judging the sound, run the Calibration assistant under the velocity curve once, as Modartt recommends, so the curve fits your keyboard.

Pianoteq 9.3.1 trial in demo mode playing middle C, E and G, which light up red on the keyboard; the NY Steinway D Classical preset, the demo badge, the velocity curve and the Volume and Dynamics sliders are outlined

Pianoteq 9.3.1 trial (Stage edition, demo mode) playing a C major chord. The 3D view of the piano is cut out of the middle.

  • Pros: small download, quick to load; a velocity curve to match your keyboard's touch; VST3, AU and a standalone app.
  • Cons: Stage keeps the model's deep settings locked; extra instrument packs cost $49 each.

A free starter kit for Live

If you add only free plugins, this set covers every job above except piano, and for limiting itself you keep Live's Limiter:

  • TDR Nova for EQ that reacts to the music
  • TDR Kotelnikov for the mix bus
  • Xfer OTT for quick two-way multiband compression
  • ChowTapeModel for tape color
  • Valhalla Supermassive on a reverb return
  • Youlean Loudness Meter 2 at the end of Main
  • Surge XT when you want more synth than Drift
Table by job: what Live 12 already has by edition, a free plugin and a paid plugin. EQ: Channel EQ and EQ Three in all editions, EQ Eight in Standard and Suite; TDR Nova; Pro-Q 4 at 199 dollars. Compression: Compressor, Glue Compressor, Multi-band Dynamics; Kotelnikov and OTT. Saturation: Saturator, Dynamic Tube, Roar; ChowTapeModel; Saturn 2 at 149 dollars. Reverb and delay: Reverb, Delay, Echo, Hybrid Reverb; Supermassive; Timeless 3 at 149 dollars. Limiting: Limiter, Spectrum; Youlean; Pro-L 2 at 199 dollars. Synths: Drift, Analog, Wavetable, Operator, Meld; Surge XT. Piano: Grand Piano and Upright Piano Packs; Pianoteq 9 Stage at 139 dollars

The whole guide on one card: Live 12's own devices by edition, then the free and paid plugin for each job.

When to spend money (and on what)

Spend when a plugin does something your edition of Live can't. A few honest cases:

  • You own Intro: there is no EQ Eight or Glue Compressor, so the free starter kit fills more gaps for you than any paid plugin would.
  • You fight one recurring problem, such as a voice that turns boomy on a few notes: try dynamic EQ (Nova first, Pro-Q 4 if you outgrow it).
  • You finish songs for release: a loudness meter matters more than a fancier limiter. Youlean is free; Pro-L 2 makes sense once you master regularly.
  • You play piano parts yourself: try a dedicated piano instrument such as Pianoteq, especially in Intro.

FabFilter's 30-day trials are fully working, so put one on a real song next to Live's device, match the levels, and keep it only if you can hear the difference with your eyes closed.

Where to go next

Each job here has a full comparison in this series. Start with VST plugins explained, then go deeper on EQ plugins, compressors, saturation and tape, reverbs, delays, limiters and loudness meters, free synths and piano plugins. Using another DAW? See the same guide for FL Studio or Logic Pro.

New to Live itself? Is Ableton Live good for beginners? and making a house track from scratch are the places to start. And if you'd like someone to listen to your mix with you, a Tissimo teacher can work through your own Live Set in a live online lesson.

Sources

Read this article online: https://tissimo.co/articles/best-plugins-for-ableton-live-12-free-and-paid

Was this useful?
Dislike buttonLike button
Thank you for your feedback imageThanks for your feedback

Comments