Skip to main content
Back
Cover image for the The Best Plugins for Logic Pro: What Logic Already Has, and the Free and Paid Audio Units Worth Adding blog article

The Best Plugins for Logic Pro: What Logic Already Has, and the Free and Paid Audio Units Worth Adding

Logic Pro 13 comes with a large collection of its own effects and instruments: Channel EQ, a Compressor with seven circuit types, ChromaVerb, Space Designer, a Limiter, a Loudness Meter, Alchemy, Studio Piano and many more. It costs $199.99 once, or comes with an Apple Creator Studio subscription ($12.99 a month or $129 a year). It needs a Mac with Apple silicon. Third-party plugins earn a place when they do a job Logic's plugins don't, or do it in a way that saves you time. This guide goes job by job: what Logic already has, then the free and paid Audio Units worth adding, with real screenshots, pros and cons, and a setting to start from. Prices and versions are as of November 2026.

How Logic Pro handles plugins

Logic Pro loads one third-party format: Audio Units. Classic Audio Units (AUv2) install into the Library/Audio/Plug-Ins/Components folder, and Audio Unit Extensions (AUv3) install as apps in your Applications folder. Apple's guide describes no VST, VST3 or CLAP support, so check for "AU" before you buy; every plugin here has an AU version, and any VST3 or CLAP files its installer adds are for other DAWs. For formats and installing in general, see VST plugins explained.

To use one, click an empty Audio Effect slot on a channel strip (or the Instrument slot on a software instrument track) and look in the Audio Units submenu, sorted by manufacturer. Effects you share between tracks, such as a reverb, belong on an aux: choose a bus in a Send slot and Logic creates the aux channel strip for you. Set the effect on the aux to 100% wet and use each track's Send knob to decide how much goes there.

Abstract diagram of four Logic Pro channel strips. An instrument strip runs top to bottom through a MIDI Effect slot, the Instrument slot, two Audio Effect slots, a Send slot and the Output slot. An audio strip has an Input slot instead of an instrument. Dashed coral lines carry both Send slots to Bus 1, the input of an aux strip whose Audio Effect slot holds a reverb at 100 percent wet. All three strips feed the output strip, Stereo Out, where a limiter comes next to last and a loudness meter last

Where plugins go in a Logic project. Insert effects run top to bottom on each strip; a send copies part of the signal to a bus, and the aux on that bus holds the shared effect.

The Plug-in Manager

Choose Logic Pro › Settings › Plug-in Manager to see every Audio Unit Logic knows about. The Compatibility column shows a check mark when a plugin has no issues, "not compatible" when the scan found a problem, and a count when a plugin has quit unexpectedly. After you install or update a plugin, select it and click Reset & Rescan Selection: Logic scans it again and activates it. You can also hide or ignore plugins you never use.

Flowchart: a plugin is missing or acts up after you installed it. Step 1, is it an Audio Unit; step 2, is it authorized; step 3, check the Plug-in Manager for a check mark or not compatible; step 4, Reset and Rescan Selection; step 5, reinstall, then rescan; step 6, ask the developer and tell them your macOS and Logic Pro versions

One check of our own (is it an Audio Unit?), then Apple's troubleshooting steps in a practical order. Stop at the first one that works.

Apple says a misbehaving Audio Unit can't make Logic quit or stop responding, but it can still cost you settings or data, so save the project before you try a new plugin.

When the computer runs out of processing power

When a project starts to struggle, click a track's Freeze button (add it to the track header if you don't see it) and start playback: Logic bounces the track to an audio file and plays that back instead (the Track inspector's "Pre Fader" mode includes every effect). Click Freeze again to edit. A bypassed plugin (Option-click its slot) stops using processing power. Some plugins add delay: hold the pointer over a slot to see how much, and turn on Low Latency Monitoring while you record.

Job by job: what Logic has, and what to add

EQ: Channel EQ, TDR Nova and FabFilter Pro-Q 4

Channel EQ, which opens when you click the EQ display on a channel strip, has eight bands (high-pass and low-pass filters, two shelves and four bells) and an analyzer. Linear Phase EQ uses the same controls, Match EQ copies the tonal "fingerprint" of one recording onto another, and the Vintage EQ collection adds colored EQs. None of them, going by Apple's parameter lists, has a band that reacts to level. DeEsser 2 does that for sibilance and Multipressor for up to four broad bands; for one narrow range, add a dynamic EQ.

Graph of the gain at one EQ band against the level in that band. A dashed gray static bell stays at minus 3 dB whatever the level. A cyan dynamic band stays at 0 dB below a threshold of minus 30 dB and cuts more and more above it at 4 to 1; a coral line does the same but stops at a 6 dB cut

A static band cuts the same amount all the time. A dynamic band cuts only when its range gets loud, and by more the louder it gets; a range setting caps the cut.

TDR Nova (Tokyo Dawn Labs, 2.2.3, free) looks like an ordinary four-band EQ with high-pass and low-pass filters, but every band also has a threshold and ratio. As a starting point for a singer who turns harsh on high notes, put a band near 3 kHz, leave its gain at 0 dB, click the band's THRESHOLD button to switch its dynamics on, and lower the threshold until it cuts only on the loud notes (the capture uses a 4.0:1 ratio).

TDR Nova 2.2.3 on a vocal-like test melody: band III selected at 3.0 kHz, Q 1.00, gain 0.0 dB, threshold minus 30.0 dB and ratio 4.0 to 1, attack 5.0 ms, release 160 ms. The golden curve dips about 3 dB around 3 kHz as the melody plays, and the high-pass filter is on at 79 Hz, 24 dB per octave

TDR Nova 2.2.3: band III at 3.0 kHz with gain 0.0 dB, threshold −30.0 dB and ratio 4.0:1. The dip around 3 kHz is the cut the band is making while the melody plays.

  • Pros: free; a dynamic section on every band; high-pass and low-pass filters and an analyzer; native Apple silicon support since version 2.1.4.
  • Cons: four bands only (the paid Gentleman's Edition has more); dynamic EQ takes practice, so change one control at a time and compare with the plugin bypassed.

FabFilter Pro-Q 4 (4.13, $199 list, 30-day full trial) is the paid step up: up to 24 bands, a dynamic mode for every bell and shelf band, spectral dynamics, EQ Match, and zero-latency, linear-phase or Natural Phase processing.

FabFilter Pro-Q 4 4.13 trial on the vocal-like melody: a green 80 Hz low cut at 18 dB per octave, a blue dynamic bell at 3 kHz, Q 2, gain 0 dB, threshold minus 30 dB and a shaded dynamic range down to minus 6 dB, and a purple high shelf of plus 1.5 dB from 10 kHz; the analyzer shows the melody's spectrum and the mode reads Zero Latency

FabFilter Pro-Q 4 4.13 (trial): the same job with a dynamic bell at 3 kHz that may cut up to 6 dB, plus an 80 Hz low cut and a gentle high shelf.

  • Pros: up to 24 bands with a dynamic mode on every bell and shelf; linear-phase and Natural Phase modes for mastering; one large display.
  • Cons: $199 is a lot if Channel EQ already does what you need; the dynamic mode covers bell and shelf bands only, not cuts or notches.

Compression: Compressor, TDR Kotelnikov and Klanghelm DC1A

Logic's Compressor offers seven circuit types: Platinum Digital, Studio VCA, Studio FET, Classic VCA, Vintage VCA, Vintage FET and Vintage Opto. Apple suggests Opto for leveling vocals, bass and guitars, and Multipressor splits the sound into up to four bands. The two free compressors below earn a place because they work differently.

TDR Kotelnikov (Tokyo Dawn Labs, 1.6.7, free) is a wideband compressor its developer calls "perfectly suited to stereo bus compression." It has separate release times for sudden peaks and for the overall level, a sidechain high-pass filter so the bass drives it less, and a Delta button that plays only what it removes.

TDR Kotelnikov 1.6.7 on a playing mix loop: threshold minus 20.0 dB, ratio 1.5 to 1, attack 19 ms, release peak 80 ms and release RMS 220 ms, sidechain high-pass at 100 Hz, 3 dB per octave; the gain reduction meter shows a small bar near the top of its 0 to 3 dB scale; Delta and Bypass buttons on the right

TDR Kotelnikov 1.6.7 on a mix: threshold −20.0 dB at 1.5:1, a gentle starting point for a group or the stereo mix. The meter shows only a fraction of a decibel of gain reduction.

  • Pros: free; independent peak and RMS release; Delta preview; native Apple silicon support since 1.6.3.
  • Cons: its controls (Peak Crest, two release knobs) work differently from Logic's Compressor, so read the manual first; frequency-dependent ratio is kept for the paid Gentleman's Edition.

Klanghelm DC1A (3.5.0, free) goes the other way: an Input knob, an Output knob and four switches. Turning Input up drives it into more compression; Output sets the level afterward. Relaxed gives gentler compression with longer time constants, and Deep keeps the low end from pumping.

The Mix control blends the compressed and dry signal, which gives you parallel compression in one plugin. On a vocal, start gently; on drums, try driving it hard and mixing it back to about half.

Two Klanghelm DC1A 3.5.0 windows side by side, their VU meters cropped out. Left, for a vocal: Input at plus 3.9 dB, Output at 0.0 dB, Relaxed lit, Mix 100 percent. Right, for parallel compression on drums: Input at plus 13.9 dB, Output at minus 4.1 dB, Deep lit, Mix 50 percent

Klanghelm DC1A 3.5.0 twice: a light vocal setting (left, Input +3.9 dB, Relaxed on) and parallel compression on drums (right, Input +13.9 dB, Output −4.1 dB, Deep on, Mix 50%). The VU meters are cropped out.

  • Pros: free; very quick to set; Mix for parallel compression and Dual Mono to compress left and right separately.
  • Cons: no threshold, ratio, attack or release to fine-tune; the knobs are marked only from −20 to +20, so set them by ear and compare with the plugin bypassed.

Saturation: ChromaGlow and Klanghelm IVGI

Logic's ChromaGlow models five kinds of analog saturation (Retro Tube, Modern Tube, Magnetic, Squeeze and Analog Preamp). Apple lists it for Macs with an M1 or later chip, which every Mac that runs Logic Pro 13 has. Overdrive, Distortion and Phat FX cover rougher sounds.

Klanghelm IVGI (2.5.0, free) does subtle to heavy saturation with four main knobs. Its manual gives a three-step routine: set Trim so the meter sits around 0 VU, set Drive to taste, then use Output to make up any lost level. With the meter in Out-In mode, it shows the difference between output and input, which helps you judge the sound and not just the volume change.

Klanghelm IVGI 2.5.0 on a drum loop: VU mode Out-In lit, Drive at 5, Output at minus 1.6 dB, Asym Mix at 5, Response at N and Relaxed off; the band with the VU meter and the small Trim and X-Talk knobs is cropped out

Klanghelm IVGI 2.5.0 on drums: Drive 5, Output −1.6 dB and the meter switched to Out-In mode. The band with the meter and the small Trim and X-Talk knobs (Trim at 0.0 dB) is cropped out, so set Output by your own meter.

  • Pros: free; Response shifts the saturation toward the lows or highs; the Out-In meter helps you match levels.
  • Cons: one basic character (plus a Relaxed variation), where ChromaGlow offers five models; it's calibrated to −18 dBFS = 0 VU, so check Trim first or the Drive settings won't behave as described.

Reverb: ChromaVerb, Space Designer, Valhalla Supermassive and FabFilter Pro-R 2

Logic covers a lot here. ChromaVerb has 14 room types, Space Designer is a convolution reverb that places sounds in recorded real spaces, and there are SilverVerb, EnVerb and the Quantec Room Simulator. Add a reverb plugin for a sound or workflow these don't give you.

Valhalla Supermassive (Valhalla DSP, 5.0.0, free, "no strings attached") has 22 reverb and echo modes, from short rooms to washes that last minutes. On an aux, click the MIX label to lock Mix at 100%, so it stays wet while you browse presets.

Valhalla Supermassive 5.0.0 set for an aux: Mix 100.0 percent, Delay 300.0 ms, Warp 50.0 percent, Feedback 55.0 percent, Density 80.0 percent, EQ high 8000 Hz and low 200 Hz, mode Sirius; the label at the top right reads Version 5.0.0 VST3

Valhalla Supermassive 5.0.0 on an aux: Mix 100.0%, mode Sirius, with the reverb cut below 200 Hz and above 8000 Hz. The top-right label names the format (VST3 in this window); Valhalla says it shows AU in an Audio Unit host.

  • Pros: free; 22 modes for echoes, swells and long tails; a Mix lock made for sends.
  • Cons: the modes behave very differently, so audition several; the only EQ is a high and a low cut.

FabFilter Pro-R 2 (2.06, $199 list, 30-day trial) aims at natural spaces and classic digital and plate sounds. One Space control moves through its room models and decay times together, and a Decay Rate EQ lets you shorten or lengthen the decay at different frequencies. On a vocal aux, start with a little predelay (20 ms here): FabFilter's help says it separates the voice from its reverb tail.

FabFilter Pro-R 2 2.06 trial on snare hits: style Plate, Space 1.50 seconds, predelay 20 ms and Mix 100 percent outlined; below, the blue Decay Rate EQ curve dips a little around 2.2 kHz and in the deep lows, and the gold Post EQ curve dips around 600 Hz and rolls off above 12 kHz, over the spectrum of the reverb

FabFilter Pro-R 2 2.06 (trial) on an aux: Plate style, Space 1.50 s, 20 ms predelay, Mix 100%. The blue Decay Rate EQ and gold Post EQ curves are the defaults.

  • Pros: plain-language controls (Space, Distance, Brightness, Character); Decay Rate EQ plus a 6-band Post EQ; Vintage and Plate algorithms; it can analyze an impulse response and match it with its own settings.
  • Cons: $199, and ChromaVerb and Space Designer already cover many of the same rooms.

Limiting and loudness: Logic's meters, Youlean and FabFilter Pro-L 2

Logic already has the essentials. Its Loudness Meter shows momentary, short-term and integrated loudness and loudness range to the EBU R 128 standard; the Level Meter has a True Peak mode; the Limiter and Adaptive Limiter both offer true peak detection; and Mastering Assistant analyzes a finished mix.

Youlean Loudness Meter 2 (2.5.15, free edition) still earns a slot at the end of the output strip because it puts integrated loudness, true peak, loudness range and a loudness history graph in one window, and the free version never expires.

Youlean Loudness Meter 2 2.5.15 free edition after a few seconds of a playing loop: short term minus 21.6 LUFS, integrated minus 21.5 LUFS, loudness range not yet measured, true peak max minus 4.2 dB, PSR 17.1 LU and PLR 17.3 LU, with a loudness history graph that turns red above the minus 23 LUFS line of the DEFAULT preset

Youlean Loudness Meter 2 2.5.15 (free edition) after a few seconds of a loop: integrated −21.5 LUFS, true peak max −4.2 dB. Play the whole song for a reading you can trust.

  • Pros: free forever; loudness, true peak and dynamics readouts with a history graph; broadcast presets included.
  • Cons: it only measures and never changes the audio; streaming-service presets need the PRO edition ($49 list).

FabFilter Pro-L 2 (2.26, $199 list, 30-day trial) is a true-peak limiter with eight limiting styles, oversampling and its own loudness metering. The capture shows a cautious way to start: ceiling at −1.0 dBTP, True Peak Limiting on, and Gain raised only until the loudest hits lose about 2 dB.

FabFilter Pro-L 2 2.26 trial on a playing mix: Gain plus 7.0 dB, style Transparent, output ceiling minus 1.0 dBTP and True Peak Limiting on; the loudest drum hits touch the ceiling and are labeled with gain reductions of minus 1.7, minus 2.2 and minus 2.3 dB

FabFilter Pro-L 2 2.26 (trial): +7.0 dB of gain into a −1.0 dBTP ceiling in the Transparent style. The labels show the limiter taking 1.7 to 2.3 dB off the loudest hits.

  • Pros: eight styles to compare; Unity Gain plays the result at the original level, so you judge the limiting and not just the extra loudness.
  • Cons: $199, and Logic's Limiter in Precision mode already has true peak detection.

Synths: Alchemy and Surge XT

Logic's synths range from the simple ES P and Retro Synth to Alchemy, which combines additive, spectral, granular, sample-based and virtual analog engines, and Sculpture. Logic users are already well supplied with synths.

Surge XT (Surge Synth Team, 1.3.4, free and open source) is the one to try anyway: more than 2,800 patches, three oscillators per scene with 12 oscillator types. It suits anyone who wants a deep synth for nothing, and because the same synth runs on Windows and Linux, a patch you make opens for a friend who isn't on a Mac. Our synthesizer basics guide explains the controls you see here.

Surge XT 1.3.4 playing an A minor chord on an edited Init Saw patch: the patch browser reads Init Saw with an asterisk in the Templates category, Unison Voices is 3, Filter 1 is a 24 dB low-pass at about 1.2 kHz with about 20 percent resonance, and the amp envelope has a 300 ms attack and 800 ms release; the Zoom button sits next to the browser

Surge XT 1.3.4: the Init Saw patch turned into a simple pad with three unison voices, a 24 dB low-pass filter and a slow attack and release. The patch arrows step through the factory sounds.

  • Pros: free (GPL-3.0); a huge preset library; an Intel and Apple silicon universal binary.
  • Cons: oscillators, filters, envelopes and modulation share one dense window, which is a lot on a laptop screen.

Piano: Studio Piano and Pianoteq

Studio Piano is Logic's sampled piano, with a Studio Grand, Concert Grand and Vintage Upright, two stereo microphone pairs and a mono microphone to mix, and controls for pedal noise, key noise and sympathetic resonance. Apple says it is optimized for Logic's Keyboard Player, and it plays from a MIDI keyboard too.

Pianoteq (Modartt, 9.3.1) models the piano instead of playing recordings, so it is about 50 MB. Pianoteq 9 Stage costs $139 with two instrument packs; Standard ($269) and PRO ($399) let you change the physical model. The free trial has every feature, but eight notes are silent and it must be restarted every 20 minutes. It suits pianists who want a modeled piano that takes little space on a laptop drive; set the velocity curve to your keyboard before you judge the sound.

Pianoteq 9.3.1 trial in demo mode playing A2, A3, C4 and E4, which light up red on the keyboard while the window names the chord Am; the NY Steinway D Classical preset, the demo badge, the velocity curve and the Volume and Dynamics sliders are outlined

Pianoteq 9.3.1 trial (Stage edition, demo mode) playing an A minor chord. The 3D view of the piano is cut out of the middle of the window.

  • Pros: a small download; a velocity curve to match your keyboard's touch; AU, VST3, AAX and a standalone app.
  • Cons: Stage locks the model's deep settings; extra instrument packs cost $49 each.

A free starter kit for Logic Pro

The whole guide on one card:

Table by job with columns for what is already in Logic Pro, a free Audio Unit and a paid Audio Unit. EQ: Channel EQ, Linear Phase EQ, Match EQ, Vintage EQ collection; TDR Nova; FabFilter Pro-Q 4 at 199 dollars. Compression: Compressor with seven circuit types, Multipressor, DeEsser 2; TDR Kotelnikov and Klanghelm DC1A. Saturation: ChromaGlow on M1 or later, Overdrive, Distortion, Phat FX; Klanghelm IVGI. Reverb: ChromaVerb, Space Designer, Quantec Room Simulator, SilverVerb; Valhalla Supermassive; FabFilter Pro-R 2 at 199 dollars. Limiting and loudness: Limiter, Adaptive Limiter, Loudness Meter, Level Meter; Youlean Loudness Meter 2 free edition; FabFilter Pro-L 2 at 199 dollars. Synths: Alchemy, Retro Synth, ES2, Sculpture; Surge XT. Piano: Studio Piano; Pianoteq 9 Stage at 139 dollars

Logic's own plugins by job, and the free and paid Audio Units worth adding.

If you add only free plugins, this set fills the gaps:

  • TDR Nova for EQ that reacts to loud notes
  • TDR Kotelnikov for gentle compression on a group or the mix
  • Klanghelm DC1A for two-knob and parallel compression
  • Klanghelm IVGI for quick four-knob saturation next to ChromaGlow
  • Valhalla Supermassive on a reverb aux
  • Youlean Loudness Meter 2 at the end of the output strip
  • Surge XT when you want a synth with thousands of presets

Before you install, check each developer's page for the macOS package. All seven list Apple silicon support.

Table of the seven free Audio Units with developer, version, use, Mac formats and the developer's Apple silicon statement: TDR Nova 2.2.3, native since 2.1.4; TDR Kotelnikov 1.6.7, native since 1.6.3; Klanghelm DC1A 3.5.0 and IVGI 2.5.0, supported natively; Valhalla Supermassive 5.0.0, native M1 to M5 builds; Youlean Loudness Meter 2 2.5.15, Intel and Apple silicon; Surge XT 1.3.4, universal binary

The starter kit with each developer's own version, format and Apple silicon details, as of November 2026.

When to spend money

Spend when a plugin does something Logic can't, not when it does the same job with a different screen. Some honest cases:

  • A recurring problem, like a voice that turns harsh only on high notes: dynamic EQ cuts only when needed. Try Nova first and move to Pro-Q 4 if you need more bands.
  • You master your own songs often: Pro-L 2's styles and Unity Gain make comparing easier, but Logic's Limiter and Loudness Meter already do the essential job.
  • You play piano parts and want to shape the instrument itself: Pianoteq Standard opens the physical model, which neither Stage nor Studio Piano offers.
  • Reverb is the least urgent purchase: between ChromaVerb, Space Designer and the free Supermassive, most home projects are covered.

Use the trials properly. FabFilter's 30-day trials are fully working: put one on a real song next to Logic's plugin, match the levels, and keep it only if you can hear the difference with your eyes closed.

Where to go next

Each job here has a full comparison in this series: EQ plugins, compressors, saturation and tape, reverbs, limiters and loudness meters, free synths and piano plugins. Using another DAW? See the same guide for Ableton Live 12 or FL Studio.

Just starting out? How to start producing music at home covers the gear and the first steps. And if you'd like someone to listen to your mix with you, a Tissimo teacher can go through your own Logic project in a live online lesson.

Sources

Read this article online: https://tissimo.co/articles/best-plugins-for-logic-pro-free-and-paid

Was this useful?
Dislike buttonLike button
Thank you for your feedback imageThanks for your feedback

Comments