Skip to main content
Back
Cover image for the Reverb Plugins Compared: Valhalla Supermassive, FabFilter Pro-R 2, Dragonfly Reverb and More blog article

Reverb Plugins Compared: Valhalla Supermassive, FabFilter Pro-R 2, Dragonfly Reverb and More

Reverb is the effect that tells a listener where a sound lives: a small bright room, a concert hall, a metal plate or a space too big to exist. This guide compares five reverb plugins on real screenshots: Valhalla Supermassive, FabFilter Pro-R 2, Dragonfly Reverb, TAL-Reverb-4 and u-he Protoverb. You'll see what each one does well, where each falls short, and five moves that work with any reverb on a return track. Versions and prices are as of November 2026.

Reverb types and the six controls that matter

Reverb plugins imitate four broad kinds of space. A room is small, with a short decay and clear early reflections. A hall is larger, with a longer, smoother tail. A plate imitates the large metal sheets studios once used; FabFilter describes its Plate style as having "quite a fast build up" and a metallic character. Then there are ambient or effect reverbs, with very long decays and echoes that grow into washes; some of Supermassive's modes can ring for minutes.

Whatever the type, the same six controls do most of the work:

  • Pre-delay: the gap between the dry sound and the start of the reverb.
  • Decay: how long the tail lasts. Engineers measure it as RT60, the time the reverb takes to fall 60 dB. Some plugins fold it into a size or space control; others, like Dragonfly, have a separate Size dial.
  • Damping: how fast the high frequencies die away compared with the rest of the tail.
  • Early versus late: the balance between the first distinct reflections and the dense tail.
  • Width: from mono to a wide stereo image.
  • Mix (dry/wet): how much reverb you hear against the original.
Two-panel diagram of one snare hit in a reverb. The left panel shows the first 200 milliseconds: the direct sound at 0 dB, a 40 ms pre-delay gap, coral early-reflection spikes and the cyan late tail starting to build. The right panel shows the whole tail falling in a straight line in dB, 60 dB down after 1.25 seconds

A simplified model of what a reverb does to one hit. Real reverbs differ in detail, and not every plugin below has a control for each stage: Protoverb, for one, offers only Decay, Dry and Wet.

The five plugins at a glance

Four of the five are free. Pro-R 2 is the paid reference, with a fully working 30-day trial.

Infographic with five cards: Valhalla Supermassive (free; VST2, VST3 and AAX, plus AU on Mac; Windows and macOS), FabFilter Pro-R 2 (USD 199, 30-day trial, VST, VST3, AU, CLAP, AAX, Windows and macOS), Dragonfly Reverb (free, open source, VST2, VST3, CLAP, LV2, no AU, Windows, macOS, Linux), TAL-Reverb-4 (free, VST, VST3, AAX, CLAP, AU on Mac, Windows, macOS, Linux) and Protoverb (free, VST3, AU on Mac, AAX on Windows, Windows, macOS, Linux beta)

Formats, systems and prices from each developer's own pages, checked November 20, 2026. Pro-R 2 is shown at its USD list price.

Valhalla Supermassive (free)

Supermassive, by Valhalla DSP, is a free reverb and delay built around feedback delay networks; Valhalla's page says each delay can be up to 2 seconds long. Version 5.0.0 has 22 modes, from Gemini, which Valhalla calls its most conventional mode, to Andromeda, whose decays can run into thousands of seconds. The new Sirius mode is described as suitable for "any size of room, hall or cathedral." It suits anyone on Windows or a Mac who wants long ambient washes and echoes at no cost.

Valhalla Supermassive 5.0.0 window with six coral boxes: Mix and Width, Delay and Warp, Feedback and Density, Mod Rate and Depth, EQ High and Low cut, and the Mode selector reading Sirius

Supermassive 5.0.0 in Sirius mode, set up as a send: Mix 100.0%, Delay 150.0 ms, Warp 50.0%, Feedback 50.0%, Density 80.0%, EQ 8000 Hz high cut and 140 Hz low cut.

  • Pros: free, with no account or email; 22 modes that range from echoes to huge washes; a Mix lock (click the MIX label) holds the mix where you set it, for example 100% wet, while you browse presets; the delay can follow your project tempo; hovering over a control shows a description.
  • Cons: no Linux version and no CLAP; no separate pre-delay knob (Delay sets the longest delay line) and no early-versus-late balance; the built-in high and low cuts are gentle 6 dB per octave filters.

FabFilter Pro-R 2 (paid, 30-day trial)

Pro-R 2 costs USD 199 at list price and runs as a fully functional trial for 30 days. Version 2.06 came out on April 16, 2026. Its central Space knob blends more than a dozen room models, from a 200 ms ambience to a ten-second, cathedral-like reverb, and the yellow label inside it shows the resulting decay time. Below the knobs sits the reverb display: a blue Decay Rate EQ curve that lengthens or shortens the decay at different frequencies, and a yellow Post EQ curve that shapes the final sound. It suits producers who want precise control over how the decay changes with frequency.

FabFilter Pro-R 2 trial window with the snare analyzer visible. Coral boxes mark the Space knob reading 2.50 s, the Style button set to Modern with Character, Thickness and Predelay, the Brightness, Width, Ducking and Mix knobs, the Distance knob, the blue Decay Rate EQ curve and the yellow Post EQ curve

Pro-R 2 2.06 (trial version) at its default setting with Mix at 100%. The gray analyzer trace shows the reverb's output while the snare hits play.

  • Pros: a single Space knob plus Decay Rate (25% to 400%); three styles (Modern, Vintage, Plate); six-band Decay Rate EQ and six-band Post EQ; pre-delay from 0 to 500 ms with tempo sync; ducking, auto gate and freeze; impulse response import (it analyzes an IR and matches it with its own settings); surround and Dolby Atmos up to 9.1.6; VST, VST3, AU, CLAP and AAX.
  • Cons: the only paid plugin here; no Linux version; knob values appear only when you hover over a knob; the IR import is not a convolution reverb.

Dragonfly Reverb (free, open source)

Dragonfly Reverb by Michael Willis is a free, open-source (GPL-3.0) bundle of four plugins: Hall, Room, Plate and Early Reflections. The current release, 3.2.10, dates from April 2023. Dragonfly Hall has preset banks from rooms to large halls, four level sliders (Dry, Early, Early Send, Late) that presets leave alone, and a spectrogram. Its spectrogram shows a simulated burst of white noise through the current settings, not your audio, the manual explains. It suits anyone who wants free room, hall and plate reverbs, Linux users included.

Dragonfly Hall Reverb window with coral boxes around the preset browser set to Small Halls, Small Clear Hall, the four level sliders with Dry at 0%, the Size and Width dials, the Predelay and Decay dials, the spectrogram, and the High and Low cut, crossover and multiplier dials

Dragonfly Hall 3.2.10 with the Small Clear Hall preset and Dry Level at 0% for use on a send. The High Mult and Low Mult dials set how much shorter or longer the highs and lows decay.

Dragonfly Room is mostly room presets; Early Reflections makes only the first reflections, with no late tail. The Plate sibling offers three algorithms, Simple, Nested and Tank, and a Dampen control, a low-pass filter inside the reverb's feedback loop.

Dragonfly Plate Reverb window with coral boxes around the Dry and Wet sliders, the plate presets with Clear Plate highlighted, the three algorithm buttons with Nested selected, the spectrogram and the Width, Predelay, Decay, Low Cut, High Cut and Dampen dials

Dragonfly Plate 3.2.10 with the Clear Plate preset's values and the Nested algorithm, Dry at 0% and Wet at 50%, Decay 0.6 s.

  • Pros: free and open source; four reverb types in one download; Windows, macOS and Linux; VST2, VST3, CLAP and LV2; separate decay multipliers for highs and lows.
  • Cons: no Audio Units version, so it won't load in Logic Pro; pre-delay and decay are set in milliseconds and seconds with no tempo sync; the spectrogram shows the settings, not your audio; no new release since April 2023.

TAL-Reverb-4 (free)

TAL Software lists TAL-Reverb-4 among its free plugins and describes it as "a high quality plate reverb with a vintage 80's character." Version 4.0.4 puts everything in one window: faders for size, damping, pre-delay, diffusion and stereo width, dry and wet faders, a ducking knob, modulation, a pitch-shifting Tune section, an EQ with low cut, high cut and a peak band, and a lo-fi section. It suits anyone who wants a plate on a vocal or snare without a manual.

TAL-Reverb-4 4.0.4 window with coral boxes around the Main faders (Size 85.00%, Damp, Delay, Diffuse, Stereo), the Ducking knob, the Mix faders with Dry 100.00% and Wet 20.00%, and the Mod, Tune, EQ and Lo-Fi sections

TAL-Reverb-4 4.0.4 at its default settings with the snare hits playing: Dry 100.00% and Wet 20.00%, the way you would use it as an insert.

  • Pros: free; every value is printed above its fader or knob; ducking, EQ and lo-fi controls built in; VST, VST3, AAX and CLAP, plus AU on a Mac; Windows, macOS and Linux (the Linux download is labeled VST2 and VST3).
  • Cons: one plate-style algorithm, with no room or hall types; stereo channels only; pre-delay is set in seconds, with no tempo sync; no new release since August 2023.

u-he Protoverb (free)

Protoverb is u-he's "experimental research reverb." Instead of avoiding room resonances, it tries to build up as many as possible. Its lower panel holds a text string that describes a randomly generated network of delays, and two RND buttons create new ones. u-he says frankly that finding a good setting is "trial and error (and luck)." Version 1.0.1 is free and needs no serial number. It suits the curious: producers who enjoy experimenting more than dialing in a precise space.

u-he Protoverb 1.0.1 window with coral boxes around the Decay, Dry and Wet knobs, the preset display, the Presets button and the randomizer panel with the RND Model and RND Delays buttons

Protoverb 1.0.1 set up as a send: Dry at minimum and Wet at maximum, as u-he's guide recommends.

The factory presets are a good way in. The browser sorts them into folders from chambers to cathedrals.

Protoverb's preset browser filling the window, with the factory folders 01 Chambers, 02 Rooms, 03 Halls, 04 Cathedrals, 05 Echoes and Flutters and 06 Special, the factory banks below them, the list of presets in the selected folder and the Close button

The Protoverb 1.0.1 preset browser. Close takes you back to the three knobs.

  • Pros: free, no serial; a different design from the other four; resizable from 70% to 200%; factory presets sorted by space.
  • Cons: only Decay, Dry and Wet, with no pre-delay, EQ or width control; results depend on random strings; the Linux version is labeled beta, and the Mac version currently has no AAX; the last release was in August 2021.

Five reverb moves on real captures

These are starting points that Sound On Sound's mixing articles and the plugins' manuals describe. Try each on a snare or a vocal, then adjust by ear.

1. Put the reverb on a send at 100% wet

Load the reverb on a return (send) track instead of on each instrument. Every track then shares one space, and each track's send knob sets how much of it enters the room. Because the dry signal already reaches the mix through its own track, the reverb on the return should be fully wet. FabFilter, Valhalla, u-he and Image-Line all give that advice in their documentation.

Signal-flow diagram: snare, vocal and keys tracks send to one reverb return set to 100 percent wet with Dry at 0, followed by an EQ with a low cut near 200 Hz, into the main mix bus; each track's dry signal also goes straight to Main, and kick and bass have their send off

One shared reverb on a send. Leaving the kick and bass dry is a common starting point, not a rule.

On TAL-Reverb-4, that means pulling Dry all the way down and Wet all the way up. The capture also has a pre-delay set, which is the next move.

TAL-Reverb-4 window with coral boxes around the Dry fader at 0.00%, the Wet fader at 100.00% and the Delay fader reading 0.078 s

TAL-Reverb-4 4.0.4 on a send: Dry 0.00%, Wet 100.00%, and a 0.078 s pre-delay, a 32nd note at 96 BPM.

2. Add pre-delay that fits the tempo

Mike Senior shows in Sound On Sound that with no pre-delay, a voice seems to step back and consonants blur; he suggests roughly 30 to 70 ms for a longer reverb. One quarter note lasts 60,000 ÷ BPM milliseconds, so at 96 BPM a 64th note is 39.1 ms and a 32nd note is 78.1 ms.

Table of note values from a 64th note to one bar of 4/4 with their lengths at 96 and 120 BPM: 39.1 and 31.3 ms, 78.1 and 62.5 ms, 156.3 and 125 ms, 312.5 and 250 ms, 625 and 500 ms, 1,250 and 1,000 ms, 2,500 and 2,000 ms, with the short values marked as pre-delay and the long ones as decay

Note values in milliseconds at two common tempos. They're starting points; Ableton's manual gives 1 to 25 ms as typical pre-delay values for natural sounds.

Dragonfly Hall prints its values under the dials. Set Predelay to 39 ms and, for a long hall, Decay to 2.5 s, one bar at 96 BPM. Its manual notes one quirk: pre-delay moves only the late reverb, so early reflections still start at once. If you want nothing to sound before the pre-delay ends, turn the Early Level slider down. If your reverb has no pre-delay of its own, as with Protoverb, put a delay with no feedback, set fully wet, before it on the return.

Dragonfly Hall Reverb with coral boxes around the Predelay dial reading 39 ms and the Decay dial reading 2.5 s, plus the spectrogram showing the longer tail

Dragonfly Hall 3.2.10 with Predelay 39 ms (a 64th note at 96 BPM) and Decay 2.5 s (one bar of 4/4), Dry at 0% for a send.

3. EQ the reverb: cut the lows, tame the highs

Reverb on low frequencies can muddy a mix. Paul White suggests a 200 Hz high-pass filter at 12 or 18 dB per octave on a reverb send, and Mike Senior usually sets his somewhere between 100 and 300 Hz. In Pro-R 2, double-click at the far left of the display to add a Post EQ low cut. If the reverb has no EQ, put any EQ after it on the return, as in the signal-flow diagram above (our EQ plugins comparison covers free ones).

FabFilter Pro-R 2 with a coral box around a new Post EQ low-cut band, its green handle at 200 Hz, on the left of the display, another around the Decay Rate EQ label for the unchanged blue curve, and one around the yellow Post EQ scale on the right

Pro-R 2 2.06 (trial version) with a Post EQ low cut at 200 Hz, 12 dB/oct. The blue Decay Rate EQ curve is unchanged.

Damping works on the tail itself. Dragonfly Hall's High Mult multiplies the decay time above the High Cross frequency. With Decay at 2.5 s and High Mult turned down from this preset's 0.5 X to 0.3 X, the highs above about 5,500 Hz fade in roughly 0.75 s, by the manual's arithmetic.

Dragonfly Hall Reverb with coral boxes around the High Cut dial at 6000 Hz and High Mult at 0.3 X, the Low Cut dial at 200 Hz, and the spectrogram whose upper bands fade sooner than the lower ones

Dragonfly Hall 3.2.10: Low Cut 200 Hz, High Cut 6000 Hz and High Mult 0.3 X with a 2.5 s decay. Compare the top of the spectrogram with the Move 2 capture: the 8 kHz and 16 kHz bands fade sooner.

4. Set a decay that fits the tempo

One way to choose a decay is to let the tail fade out by a musical landmark, such as the next snare hit. At 96 BPM a half note lasts 1,250 ms, so 1.25 s is one starting point for a snare. Then balance length against level, as Mike Senior advises: a tail that's too long forces you to keep the reverb low. Hugh Robjohns adds that even the biggest halls rarely exceed four seconds, and that two seconds is often long enough.

FabFilter Pro-R 2 with a coral box around the Space knob whose yellow label reads 1.25 s and another around the Predelay knob

Pro-R 2 2.06 (trial version): Space set to 1.25 s, a half note at 96 BPM, with Predelay at 39.1 ms.

5. The big ambient throw

A throw sends just one word or hit into a huge reverb, usually by automating a send, so the rest of the part stays dry. Supermassive's Libra mode has a long decay and very high density, according to Valhalla, and a raised low cut keeps the wash from filling the bass.

Valhalla Supermassive in Libra mode with coral boxes around Feedback at 85.0%, Density at 100.0%, the EQ Low at 290 Hz and High at 5000 Hz, Delay at 400.0 ms and Warp at 60.0%, and the Mode reading Libra

Supermassive 5.0.0 for a throw: Libra mode, Delay 400.0 ms, Warp 60.0%, Feedback 85.0%, Density 100.0%, EQ 290 Hz to 5000 Hz.

Automate the send up for the last word of a phrase, then back down. If the throw blurs the next phrase, lower the feedback before you lower the send. For echoes instead of washes, see our delay plugins comparison.

Common mistakes

  • Too much and too long. Robjohns calls too much reverb and overlong tails "the classic mistakes of the novice." Set the decay first, then find the lowest send level that still gives a sense of space.
  • A muddy low end. Unfiltered reverb on kick, bass and low piano notes can cloud the whole low end. Low-cut the return and send less from the bass parts.
  • Everything in a different space. Five reverbs on five tracks put each instrument in its own room. Senior's approach is two shared returns: a short ambience that makes separate parts stick together and a longer reverb for the sense of space.
  • Judging it solo. A reverb level set with the vocal soloed can be wrong once the band plays, so judge it in the full mix.

Using them in Ableton Live, FL Studio and Logic Pro

All five plugins come as VST3 for Windows and Mac, which both Ableton Live and FL Studio load. Live also takes VST2 and, on a Mac, Audio Units; FL Studio takes VST2 too, plus CLAP and, on a Mac, Audio Units. Logic Pro is different: Apple's guide names only Audio Units for third-party plugins. Supermassive, Pro-R 2, TAL-Reverb-4 and Protoverb all ship an AU version; Dragonfly does not. Installation steps are in our plugin formats guide.

Your DAW's own reverb is often enough, especially for one shared room:

  • Ableton Live: Reverb has input filters, early reflections, a diffusion network and pre-delay. Hybrid Reverb, which Ableton lists for Suite, adds convolution. Our Ableton stock-device mixing guide sets one up on a return.
  • FL Studio: Fruity Reeverb 2 has low and high cut, pre-delay with a tempo switch, and decay; Fruity Convolver comes with every edition, LuxeVerb with the All Plugins Edition.
  • Logic Pro: ChromaVerb, SilverVerb, EnVerb, the Quantec Room Simulator and the Space Designer convolution reverb.
Ableton Live 12 Reverb device on a return track with coral tags on Predelay 15.0 ms, Decay 800 ms and Dry/Wet 100 percent

Live's own Reverb on a return track in Live 12.4.15, fully wet, from our Ableton mixing guide.

FL Studio's counterpart is Fruity Reeverb 2.

FL Studio's Fruity Reeverb 2 window with coral boxes around the H.CUT and L.CUT knobs, the DELAY knob with its TEMPO switch, the DEC and DAMP knobs, and the DRY, ER and WET faders

Fruity Reeverb 2 in FL Studio 2026 (26.1.7) at its default settings. On a send, Image-Line's manual sets DRY to 0% and WET to 100%.

Reach for a plugin when it does a job more directly than your DAW's reverb: Supermassive's huge modes, Pro-R 2's six-band Decay Rate EQ or TAL-Reverb-4's built-in ducking. Our DAW guides list more: Ableton Live, FL Studio and Logic Pro.

Which reverb should you use?

Decision chart: one free reverb for rooms and halls on Windows, macOS or Linux leads to Dragonfly Hall or Room; a fast simple plate leads to TAL-Reverb-4; huge pads and throws lead to Valhalla Supermassive; experimenting leads to Protoverb; precise decay shaping, IR import or Atmos leads to FabFilter Pro-R 2; just starting out leads to your DAW's own reverb

Pick by the job. Nothing stops you from installing all four free plugins (three in Logic Pro, which can't load Dragonfly).

If you're starting out, master your DAW's reverb on one send first. Add Dragonfly when you want dedicated room, hall and plate reverbs, Supermassive for ambience and throws, and TAL-Reverb-4 for a quick plate. Try Protoverb when you're curious. Pro-R 2's 30-day trial lets you test its per-frequency decay control before you buy.

Free worksheet for this lesson

  • Tempo Math: Beats, Bars and Delay Times: practice turning BPM and note values into milliseconds with quarter, eighth, sixteenth and dotted-eighth notes and the 4/4 bar. The same formula gives the pre-delay and decay values above.

Give your mix one room

Start with one reverb on a send, fully wet, with a tempo-based pre-delay, a low cut and a decay that ends before the next important beat. If you'd like a second pair of ears on your own sessions, a Tissimo music production teacher can work through your reverb choices with you in a live lesson.

Sources

Read this article online: https://tissimo.co/articles/reverb-plugins-compared-supermassive-pro-r-2-dragonfly-and-more

Was this useful?
Dislike buttonLike button
Thank you for your feedback imageThanks for your feedback

Comments