Music Production
Sidechain
A sidechain is a signal path used to control an audio processor rather than simply being mixed into its output. It can use the processed sound itself or a separate source to determine how the processor responds.
A compressor needs both audio to process and information about when to reduce its level. Its sidechain supplies the detection path. With an internal sidechain, the detector listens to the signal being processed; its tap may be before or after gain reduction, depending on the design. With an external sidechain, another signal controls the processing. Producers often use the word specifically for this external arrangement, but sidechains are not limited to it.
Which sound changes?
Suppose a sustained pad should dip on each kick-drum hit. Put the compressor on the pad, and choose the kick as its external sidechain source. The pad is attenuated when the detector calls for gain reduction. The kick is the controller, not the sound that this compressor is turning down.
Routing the kick to a detector does not itself add the kick to the compressor's normal output. You may still hear it through its own mixer channel; a sidechain-listen button can audition the detector separately.
More than rhythmic pumping
A voiceover can control compression on background music, a technique called ducking. Sidechains can also control gates or other processors, so the result is not always a reduction in level. Filtering a compressor's sidechain changes what its detector responds to; it does not directly apply that same EQ curve to the main audio path.
A routing check
On paper, draw two arrows: pad to compressor audio input, kick to detector input. Name which track changes level. In a DAW, inspect the gain-reduction meter and compare bypassed playback at a similar loudness. If the kick is not triggering the effect, check its sidechain source and tap point before raising the audio level. Automation can also make rhythmic dips without any sidechain signal.
Common questions
Does sidechaining always need another track?
No. An internal sidechain takes its control signal from the audio being processed. An external sidechain uses another source, which need not be a separately audible track.
Is every pumping effect sidechain compression?
No. Volume automation and other modulation can create a similar pattern. Sidechain compression specifically uses a detector signal to control gain reduction.