
Indian Classical Music Basics: Raga and Tala Explained for Western Listeners
Western musicians meeting a sitar recital for the first time often look for the written score. There usually isn't one in the Western sense: much of the music is improvised within rules the performers have absorbed. Those rules come down to two ideas: a raga, which tells them which notes to use and how to move among them, and a tala, a rhythmic cycle that keeps coming around. This guide explains both, with a few small examples in staff notation, so you can listen to a Hindustani or Carnatic performance and know what you are hearing. One note on vocabulary: Indian musicians name the steps of a scale Sa Re Ga Ma Pa Dha Ni, which the section on swaras below explains.
Two traditions, one set of ideas
South Asian classical music has two principal types. Hindustani music is found mainly in the northern three-fourths of the subcontinent; Carnatic music belongs to the Dravidian-speaking south. According to Encyclopaedia Britannica, the two began to drift apart in the 13th century, after the Islamic conquest of the north brought Arab and Persian musical practices that blended with Hindu traditions. The south was barely touched by those influences.

The two traditions side by side. Both rest on raga and tala; the repertoires and many stylistic details differ.
The differences you will notice first: Hindustani music gives instruments a larger role (sitar, sarod, sarangi, shehnai and the tabla drums), while Carnatic music is built around the voice, with instruments imitating singing and no forms that are purely instrumental. Carnatic composers such as Tyagaraja, Muthuswami Dikshitar and Syama Sastri, the "trinity" of the early 19th century, wrote devotional songs called kritis that are still central to the repertoire.
What they share matters more for a beginner. Both use ragas, both use talas, and both include free, unmetered improvisation. Each tradition has its own repertoire of actual ragas and talas, and the two systems may use different names for similar ragas or the same name for different ones. This article leans on Hindustani examples because that is where the instrumental concert form described below comes from; most of the ideas carry across.
Sa Re Ga Ma: the swaras
The seven note names, swaras, are Sa, Re, Ga, Ma, Pa, Dha, Ni. If you have met do-re-mi, you already have the idea of syllables for scale steps. The crucial difference: Sa is not a fixed pitch. The performer chooses it, and everything is measured from it, just as in movable-do solfege (see solfege explained and Movable Do: The First Five Notes).

Sargam against Western note names and movable-do syllables, with Sa = C. Sa and Pa are never altered; Re, Ga, Dha and Ni can be lowered (komal) and Ma raised (tivra).
Sa and Pa are unalterable anchors. Re, Ga, Dha and Ni each have a lowered (komal) form, and Ma has a raised (tivra) form. Count them: seven swaras plus five variants gives twelve pitches in an octave, which is how a Western ear can map them. Indian theory goes further. Britannica notes that the octave is divided into 22 shrutis, microtonal units comparable to quarter tones, which is why notation on a Western staff is always an approximation, and why a flat or sharp in a figure here gives you the gist, not the exact tuning.
What a raga is
The word comes from Sanskrit and means "color" or "passion." A raga is a framework for melody, used both for composing and for improvising. Think of it as a recipe with three parts: a set of notes, a customary way of moving among them, and a stock of small melodic figures that make the raga recognizable. Staying inside that recipe, the performer shapes a mood (rasa) that belongs to that raga alone. Britannica counts several hundred ragas in present use.
That is why "scale" is only half the answer. A raga can differ between ascent (aroha) and descent (avaroha), and two ragas can share a scale yet sound different because they stress different notes and favor different turns of phrase.
The simplest case is Bhupali, which uses five notes, the same going up and coming down. The three ragas shown in this article are written here with the same notes in both directions (in practice, Yaman's ascent often skips Sa and Pa), so none of the figures demonstrates an ascent that differs from its descent, and their characteristic phrases (pakad) are not notated here: those need a teacher or a good recording rather than a figure.

Bhupali with Sa set to C: ascent in bar 1, descent in bar 2. The five pitches are those of a major pentatonic scale.
Notice what is missing: no fourth degree (Ma) and no seventh (Ni). That is the major pentatonic scale you may already know from folk tunes and improvising (see the pentatonic scale explained), covered in The Pentatonic & Blues Scales. Bhupali also has a Carnatic counterpart with the same scale, called Mohanam, which shows how the two traditions can name the same notes differently.
The scale does not tell you which notes matter most. Traditionally each raga has a most important note, the vadi, and a second most important one, the samvadi; for Bhupali they are Ga and Dha. Melodies keep returning to those degrees and treat the others as stepping stones. The sketch near the end of this article leans on Ga in the same spirit: it is the longest note of the first bar and returns in every bar of the cycle.
Two seven-note ragas show how much one or two altered notes can change.

Yaman (one raised note, Ma′) and Bhairav (two lowered notes, re and dha), both with Sa on C. The staff shows equal-tempered approximations.
Yaman's only altered note is the raised fourth, F♯ here. Seen as a Western scale, C D E F♯ G A B is the Lydian mode, and you can try the idea on the keys with The modes and in the modes explained article. Bhairav's lowered second and sixth match none of the seven church modes; the gap from D♭ up to E is three half steps, an interval you can measure with Half steps & whole steps.
Northern theory sorts ragas by their notes into families called thaats, a system set out by Vishnu Narayan Bhatkhande in the early 20th century. Yaman belongs to the Kalyan thaat and Bhairav to the Bhairav thaat, and each thaat is simply a seven-note pattern with Sa and Pa fixed and a choice of form for the five other notes. Britannica notes that northern ragas are traditionally also classed by mood, season and time of day, while southern ragas are grouped by the technical traits of their scales.
Mood and time of day
Tradition ties ragas to times of day and seasons. Britannica notes that ragas were traditionally associated with specific times and seasons, and even supernatural effects, but that these restrictions are largely ignored in modern concert life, since most public performances take place in the evening. Musicians still mention the traditional associations in introductions. The ITC Sangeet Research Academy lists Bhairav among its dawn ragas (4:00 to 7:00) and Yaman among its night ragas (19:00 to 22:00).

Traditional windows for two ragas. Sources give slightly different hours, so read the bars as rough.
Treat these as how the tradition describes the music, not as a claim about what any listener must feel.
The drone: the tanpura
The ground under every raga is the drone. In both traditions it comes from the tambura (also spelled tanpura), a long-necked lute with four strings. It plays no melody; its only job is the supporting drone, usually Sa and Pa, that never changes. Britannica calls it the tonal foundation from which a singer or soloist develops the raga.

A tanpura's four strings, with Sa = C. Plucked one after another and repeated, they sound Pa, Sa, Sa and a low Sa.
The strings are tuned to Sa and Pa, or to Sa and Ma for ragas that leave Pa out. Britannica gives the tuning as c–c′–c′–g (or c–c′–c′–f) for the four strings; in the figure the Pa is written below the upper Sa strings and one Sa an octave lower, a common arrangement, so treat the exact octaves as illustrative. Your job as a listener: stay with that sound. Every note of the melody is heard against it. When Yaman's raised fourth arrives, you hear it as a distance from Sa, because Sa has never stopped sounding.
Tala: the rhythmic cycle
Where raga gives the melody its shape, tala gives the rhythm its frame. Britannica defines tala as a metric cycle with a specific number of beats, from 3 to 128, that recur in the same pattern throughout a performance. It is not quite meter. In the north, beats fall in groups of two, three or four and include strong as well as "empty" beats, and the character of each beat is spoken as rhythmic syllables, called bols, that correspond to strokes on the drum.
Among the most often used Hindustani talas is teentaal (also tintal): 16 beats in four groups of 4 + 4 + 4 + 4. Three terms name its marked beats:
- Sam, beat 1, the arrival point of the cycle and the first of three claps.
- Taali, the claps, on beats 1, 5 and 13. The three claps give teentaal its name (teen, "three"; taal, "clap").
- Khali, "empty," on beat 9, where the hand waves instead of clapping.
Britannica describes khali as a conscious negation of stress that often falls at the halfway point of the cycle and is marked by a wave of the hand, which is exactly where beat 9 sits in a 16-beat cycle.

Teentaal as a wheel: claps on beats 1, 5 and 13, a wave on 9. After beat 16 the cycle starts again at sam.
The traditional drum pattern, the theka, spells it out. Here is one common version, written as four bars of 4/4 simply so you can count it.

The teentaal theka. X is sam, 2 and 3 are claps and 0 is khali. Schools differ in details, especially in the last two divisions; some players say Na instead of Dha on beat 9, the khali, to mark that the division is empty.
Other cycles are shorter or lopsided. Britannica lists rupaktal as 3 + 2 + 2 and jhaptal as 2 + 3 + 2 + 3 among the most often used Hindustani talas. In the south, adi, by far the most common, is 4 + 2 + 2. Counted in groups of unequal length, seven and ten beats become easy to hold.

Three other cycles, drawn as groups. Adi tala is Carnatic; rupaktal and jhaptal are Hindustani. Filled circles mark group starts, not claps: in rupaktal the first beat is traditionally a wave (khali).
Try counting adi tala aloud as "1 2 3 4, 5 6, 7 8" with a clap on each group's first beat, and you will feel why the grouping, not just the total, defines the cycle. If that sounds like the grouped counting in Western odd meters, it is closely related: see odd time signatures explained and the Feeling 5/8 and 7/8 worksheet.
Britannica adds a detail worth remembering: musicians create excitement by playing rhythmic patterns that contradict the tala but eventually return to its fundamental scheme, and the cycle is kept in the soloist's mind whether or not anyone plays it. That is a cousin of what you meet in polyrhythms explained, and a good reason to practice holding a pulse in silence with Keep the Pulse Through Silence.
How a performance unfolds
A Hindustani recital starts slowly. In the alap the soloist introduces the raga note by note, with no beat at all. In the jor a steady pulse appears, but there is still no cycle, and the jhala pushes that pulse faster. Only then does the composed piece begin: a gat on sitar or sarod, or a khayal for a singer. With it come the tabla and the tala, and the improvisation often turns into a friendly contest between soloist and drummer.
The full alap–jor–jhala sequence belongs mainly to instrumental recitals (and the older dhrupad style); a khayal singer usually gives a shorter alap and moves into the composition. A whole program may run well over an hour.

The usual order of an instrumental Hindustani recital. The tala only appears when the composed piece begins.
So the order moves from free to bound: no pulse, a pulse, a faster pulse, then a full cycle with drums.
Putting raga and tala together
Here is an original sketch, made for this article and not drawn from any recording. It uses Bhupali's five notes over one 16-beat teentaal cycle, ending on Sa at the next sam.

Four bars make one cycle of 16 beats; the whole note on Sa lands on sam. Real Hindustani music is not written this way and the exact tuning differs.
Play it on a keyboard with a low C (the drone) held underneath, and clap the tala: clap on the first beat of bars 1, 2 and 4, wave on the first beat of bar 3, and clap again as the final Sa lands on sam. It will sound simple, because it is. A skilled performer would spend minutes on the same five notes, emphasizing some, lingering on others, and sliding between them in ways staff notation cannot show.
Three habits to leave at the door
Western listeners tend to bring expectations that raga music does not meet. Three are worth setting aside.
- Waiting for chord changes. The harmony here is the drone, one repeated chord underneath everything. Interest comes from the melody and the rhythm moving against that fixed background, not from a progression.
- Expecting a short piece. Britannica says a single raga performance typically lasts half an hour or more, and a whole Hindustani concert can run well over an hour. The form is built to unfold slowly.
- Hearing improvisation as a free-for-all. The performer may improvise entirely, or combine improvisation with a memorized composition, but either way only the notes of the raga are used. The freedom is inside a strict frame.
What the staff cannot show
Every figure here is an approximation, and you should know how. The notes are written as equal-tempered pitches, but performers tune and shade notes by ear and by tradition. Notes are often reached by a slide (meend) or shaken with ornaments (gamaka); a quarter-note head shows neither. Britannica also notes that Carnatic playing imitates the voice, with embellishments characteristic of singing. Finally, the tradition is taught largely face to face, teacher to student, with notation as an aid rather than the score. Treat the staff as a map of the notes, not a recording of the sound.
How a Western learner can listen
You do not need to know the ragas to listen well. Start with the first few minutes of a performance and follow this order.

A listening guide: drone, pitch, pulse, sam, return.
First, find Sa in the drone and hum it. Then notice which pitches the melody keeps coming back to. During the alap there is no beat to count; enjoy that. When the pulse appears, tap it. When the tabla arrives, wait for the downbeat of the cycle, the sam, and notice how the soloist aims for it. Last, notice a short phrase the soloist keeps returning to, changed a little each time.
When you want to try ideas yourself, a ten-minute routine is enough. Hold C on a keyboard, or play a tanpura app or recording, and sing Sa until it sits comfortably. Sing the Bhupali ascent and descent on the syllables. Then play the sketch above slowly with the drone going. Finally, set Yaman's scale beside Bhairav's on the same Sa and describe the difference in your own words: which one sounds brighter, which one darker, and which note is responsible.
Free worksheets for this lesson
- The Pentatonic & Blues Scales — the five-note scale that Bhupali shares
- The modes — seven scales from the white keys, including the Lydian color of Yaman's scale
- Half steps & whole steps — the building blocks behind komal and tivra
- Movable Do: The First Five Notes — do moves with the key, like Sa
- Feeling 5/8 and 7/8 — grouping beats in twos and threes
- Keep the Pulse Through Silence — keep the beat while the click drops out
Where to go next
The best way to take this further is with someone who can sing a phrase back to you. A Tissimo music teacher can help you sort what you hear from what you imagine and work on rhythm and pitch. You can book a lesson when you want a live ear on it.
Sources
- raga — Encyclopaedia Britannica
- tala — Encyclopaedia Britannica
- Hindustani classical music — Encyclopaedia Britannica
- Carnatic music — Encyclopaedia Britannica
- tambura — Encyclopaedia Britannica
- sruti — Encyclopaedia Britannica
- Samay Raga — ITC Sangeet Research Academy
- khali — Encyclopaedia Britannica
- Martin Clayton, Time in Indian Music: Rhythm, Metre, and Form in North Indian Rag Performance (Oxford University Press, 2000), further reading on tala
- Teental — Wikipedia (secondary cross-check)
- Svara — Wikipedia (secondary cross-check)
- Thaat — Wikipedia (secondary cross-check)
- Bhoopali — Wikipedia (secondary cross-check for Bhupali's vadi, samvadi and its Carnatic counterpart Mohanam)
Read this article online: https://tissimo.co/articles/indian-classical-music-basics-raga-and-tala

Comments