
Guitar Power Chords: The Movable Root–Fifth Shape
Pick any two notes on the guitar and very few combinations are as satisfying to hold down as the root and the perfect fifth. That pairing is the whole secret of the power chord: two (or three) strings, no third, one movable shape that works in every key and fits any mood without changing a thing. This guide walks through what the shape is, how to find it on strings 6 and 5, how to name the chord from the fret you land on, and how to slide the same form to new roots.
What makes this worth learning early? You can produce a full, resonant sound from just two strings on day one. You do not need to reach across four or five strings the way you do with open chords, and you do not yet need the index-finger strength that barre chords require. A single two-note shape — once it is clean and clear — gives you access to every common power chord on the entire neck.
Your teacher should confirm that your fretting hand is ready before you work through the later sections.
What "5" in a chord name means
When you see a chord symbol like G5, C5 or A5, the number tells you which interval sits above the root. A "5" chord contains the root and the perfect fifth — and nothing else. No major third, no minor third, no seventh.
A perfect fifth spans 7 semitones (half steps). The Half steps & whole steps worksheet shows half and whole steps on the piano keyboard; on the guitar each fret is one half step, so seven frets up one string is a perfect fifth. Seven semitones is the gap between C and G, between G and D, and between A and E — any perfect fifth. (Adjacent open strings in standard tuning are actually a perfect fourth apart, five semitones — except the G–B pair, which is a major third — as the section on the two-note shape explains.) The perfect fifth has a frequency ratio of 3:2 in just intonation, which makes it one of the most consonant intervals in music: the Wikipedia article on the perfect fifth notes that it is "more consonant, or stable, than any other interval except the unison and the octave."
Why does "5" in the chord symbol refer to this interval and not to, say, the fifth string of the guitar? The number is a scale degree, not a string number. In any major or minor scale, the fifth scale degree is 7 semitones above the first (the root). When a chord symbol uses a number, the number names an interval counted up from the root: a "7" chord adds a seventh, a "9" chord adds a ninth, and so on. A "5" chord adds only the fifth — which is the same thing as the perfect fifth interval — and then stops. No third is ever piled on top.
Because the power chord has no third, it is neither major nor minor. The third is the single note that decides whether a chord sounds bright (major third, 4 semitones above the root) or darker (minor third, 3 semitones above the root). Leave it out entirely, and the chord sits comfortably in both worlds. G5 fits over a G major passage just as naturally as over a G minor passage. That neutrality is precisely what makes the shape so useful when a song moves between major and minor chords, or when the harmony is left deliberately ambiguous.
The chord symbol for a power chord is normally the root name followed by "5" — G5, A5, E5, C5. Some published charts write it as "G(no 3)" to show explicitly that the third is missing, but "G5" is far more common in guitar music.
A power chord has no third, so a single shape serves major and minor contexts alike.
Guitar notation: sounding vs. written pitch
Before the figures below, one fact to fix firmly: guitar sounds one octave lower than written. If the note on the treble staff looks like G3, it sounds at G2. This is a standard convention; many editions show it with a small "8" below the treble clef (an octave clef). All notation in this article follows that convention. The worksheet The Staff & the Treble Clef covers how to read the treble staff; just remember that every guitar pitch sounds an octave below what you see.
Standard tuning gives the six open strings as E2, A2, D3, G3, B3, and E4 (sounding pitches), from string 6 (thickest) to string 1 (thinnest).
The two-note shape on string 6
Place your fretting finger on string 6 at any fret. That note is the root of your power chord. Now count up two frets on string 5 — the next string toward the floor. That note is the perfect fifth above your root. The usual fingering is the index finger (finger 1) on the root and the ring finger (finger 3) on the fifth; in the three-note shape the little finger (finger 4) usually takes the octave. Pick only the strings that belong to the shape.
Why two frets? String 5 open (A2) is 5 semitones above string 6 open (E2). A perfect fifth needs 7 semitones. The difference is 7 − 5 = 2 frets. That calculation works at every fret on the neck because the strings remain a consistent interval apart. Put differently: adjacent strings in standard tuning (except the G–B pair on strings 3 and 2) are always a perfect fourth apart, which is 5 semitones. You need 7 to reach the fifth. Add 2 frets on the higher string and you bridge the gap exactly.

E5 starting on the open sixth string. Circled numbers show which string each note is on: string 6 for the root E, string 5 for the fifth B. The clef's small "8" means both notes sound one octave below what is written.
Slide that same two-note shape up the neck to fret 3 and you have G5:

G5. Root G at fret 3, fifth D at fret 5. The shape is identical to E5 — only the fret position changes.
The fretboard diagram below shows the same G5 shape with the root circled and an arrow marking the +2-fret jump to the fifth.

Root G on string 6 at fret 3 (circled). Fifth D on string 5 at fret 5 — always two frets higher than the root. Sounding: G2 and D3, a perfect fifth of 7 semitones.
Add the octave: the three-note shape
You can reinforce the root by adding its octave on the next string toward the floor. If the root is at fret X, the fifth is on string 5 at fret X+2; extend the shape to string 4, also at fret X+2.
String 4 open (D3) is 10 semitones above string 6 open (E2). An octave above the root needs 12 semitones. The difference is 12 − 10 = 2 frets — the same offset as the fifth. So the three-note shape has its top two notes at the same fret number, on strings 5 and 4.
When to use two notes versus three. The two-note version is leaner and cuts through clearly when the arrangement is busy or when you want a sharper, more percussive attack. The three-note version adds more body and volume; the doubled root (an octave higher) makes the chord feel thicker without changing its identity — both shapes carry only the pitch classes root and fifth. Many players start by practicing the two-note shape until it is consistent, then add string 4 once the hand is settled. Your teacher can confirm when adding the octave is appropriate for your fretting hand.

G5 with the octave added. All three notes are still G and D (the pitch classes {G, D}): the top G is an octave above the root. Sounding: G2, D3, G3.
The fretboard diagram below shows how the fifth and octave stack on strings 5 and 4 at the same fret column.

Three-note G5. The fifth (D) and octave (G) are boxed together on the same fret — fret 5 — on strings 5 and 4. Sounding: G2, D3, G3.
The figure below shows the shape built up step by step: root alone, then fifth added, then octave added.

Root → root + fifth → root + fifth + octave. No third is added at any stage.
Naming the chord from the root fret
The chord name comes entirely from the root. Find the root fret, name the note, add "5." The fifth on the string above is not separately named — it is always there, always a perfect fifth above whatever root you choose. Only the root changes as you move up the neck.
String 6 roots
On string 6, the open string is E. Each fret adds one semitone, so the root map is:

String-6 root frets. Dark circles mark the natural-note roots: E=0, F=1, G=3, A=5, B=7, C=8. The sharp/flat roots fall on the lighter circles between them.
Working the string-6 map into memory takes repetition, but not mindless repetition. A useful approach: pick a root name, say G, then find it without looking at the map (fret 3). Check it. Try another: A is at fret 5, B at fret 7, C at fret 8. The chromatic notes — F♯, G♯, B♭, and so on — fall on the lighter circles between the natural notes. For now, focus on the six natural-note roots, since those are the shapes you will encounter most often in beginner-level music.
The One Shape, Many Roots handout puts the two-note and three-note shapes side by side, with a short root reference for strings 6 and 5 and six chords to name. Keep it on your music stand until the fret numbers stick.
String 5 roots
The same shape works with the root on string 5 (the A string), where the fifth falls on string 4. String 5 open is A, so:

String-5 root frets. A=0, B=2, C=3, D=5, E=7, F=8, G=10.
Here are A5 and D5 on string 5 in standard notation:

A5 on string 5. The root A is the open A string (fret 0); the fifth E is at fret 2 on string 4. Sounding: A2 and E3.

D5 on string 5. Root D at fret 5, fifth A at fret 7. Sounding: D3 and A3.
Being able to use string 5 roots is important because it gives you a second place to find each root. G5 is on string 6 at fret 3; a G5 one octave higher is on string 5 at fret 10, closer to the body. D5 is the same pitch at string 6 fret 10 and string 5 fret 5. Having both string options means you can choose the position that fits a particular passage best, without breaking from one part of the neck to another unnecessarily.
The infographic below collects the three numbers at the heart of this lesson.

Seven semitones, two frets, no thirds. The two root-name tables let you name any power chord from its fret.
The Which Power Chord Is It? exercise gives you eight identification drills — four naming a chord from a given fret, four finding the fret for a named chord — plus two teacher-observed move-the-shape attempts.
Moving the shape: E5, G5, A5 on string 6
This is the power chord's great practical advantage: one shape, every root. Keep the two-note (or three-note) fingering exactly as it is and slide the whole thing to a new starting fret. The shape never changes — your fingers stay in the same relative position. This is what distinguishes a movable shape from an open chord: an open chord depends on specific open strings and cannot simply be slid up the neck. Because the fretted power chord uses no open strings, the entire geometry travels intact. (At fret 0 the open string is the root, as in E5 and A5, and you fret only the fifth.)
A short practice progression helps you hear the shape in motion. Try the sequence E5 (string 6, fret 0) → G5 (string 6, fret 3) → A5 (string 6, fret 5) → G5 (string 6, fret 3) → E5. That is a move of three frets up, two frets up, two frets down, and three frets down. The shape sounds and feels the same at every stop. Play each chord slowly enough to check that both strings ring cleanly before you move to the next root.
Here are E5, G5 and A5, all on string 6, in a single bar of notation:

E5 (fret 0), G5 (fret 3), A5 (fret 5) — the same two-note shape at three positions on string 6. Chord symbols appear above the staff.
The move from E5 to G5 is three frets up the neck. The move from G5 to A5 is two frets further. Only the root fret changes; the relationship between the two notes stays fixed. This is the defining quality of a movable shape: the hand does not need to reorganize itself, so your attention goes entirely to finding the right starting fret.
When you practice moving between shapes, keep the motion deliberate at first. Let the chord ring, lift cleanly, relocate, land, and check that both strings still sound clear before you pick again. Speed comes after accuracy is reliable. Notice that the same fret-distance logic works on string 5: A5 (fret 0) → C5 (fret 3) → D5 (fret 5) is the same sequence of moves — three frets, then two — just starting from a different open string. The root names change because string 5 opens on A instead of E, but the shape and the fret offsets are identical.
Here is that string-5 sequence in notation:

A5 (fret 0), C5 (fret 3), D5 (fret 5) — the same shape on string 5.
After each chord, stop the sound: relax the fretting fingers so they rest on the strings without pressing them down, and when the root is an open string (E5, A5) rest the picking hand on that string as well. No string should keep ringing. A clean stop is a technique in its own right, and your teacher can observe it directly.
The practice routine below organizes these moves into a short daily drill.

A five-step routine from two strings to a named, movable power chord.
Contrast this workflow with the Em, Am and C: Map the Change handout, which tracks individual finger paths for Em, Am and C. Those chords include a third — Am has C on string 2 — and each chord has a unique shape. With power chords you learn one shape and read a single fret number.
Palm muting: an optional color
Palm muting shortens the sustain of each note, giving power chords a tighter, more percussive sound. The picking hand rests lightly near the bridge of the guitar, the fleshy edge of the palm just touching the strings where they meet the saddles. In notation and TAB, the marking is P.M. with a dashed line showing how long it continues.

P.M. marking above beats 1–2: palm-muted E5. Beats 3–4: unmuted G5 for comparison. The teacher confirms hand placement before you try this.
Palm muting is optional and teacher-led. The feel of the hand position, the amount of contact and where the hand rests all affect the sound and your comfort. Moving the hand slightly toward the neck increases the muting effect; moving it closer to the bridge lightens it. Work on the basic shape first and get a consistently clean, clear two-note or three-note chord before you add palm muting. Your teacher will introduce it when the fretting hand is settled.
Power chord, open chord, barre chord: what changes
Power chords, open chords and barre chords differ in how many notes they use, in whether the shape can move, and in what the notes tell you about the chord's quality.

Power chord: root + fifth only, no third, 2–3 strings. Open chord: root + third + fifth, third sets quality, 4–6 strings, fixed shape per root. Barre chord: full chord with third, index finger bars five or six strings.
An open chord like Em uses strings 6 through 1 (or a subset), includes a minor third (G on string 3), and has a fixed shape at a fixed root. A barre chord like Bm moves up the neck with the index finger barring five or six strings at one fret, still including the third that labels it minor. A power chord uses only 2–3 strings and omits the third entirely, so the same shape suits a Gm passage just as well as a G major one.
The Em, Am and C: Map the Change handout is the natural companion for learning those fixed open shapes alongside the movable power chord.
Free worksheets for this lesson
- One Shape, Many Roots — Handout 484: chord-box diagrams and notation of the two-note and three-note G5 shapes, six chords to name from their root fret, and move-the-shape diagrams for E5, G5, A5 and C5.
- Which Power Chord Is It? — Exercise 191: eight identification drills (naming and placing) plus two teacher-observed shape-move attempts with a rubric.
- Em, Am and C: Map the Change — Handout 402: finger-by-finger maps for changing between Em, Am and C, the natural next step after the power chord.
- Half steps & whole steps — Handout 353: half steps and whole steps on the piano keyboard and on the staff. On the guitar, one fret is one half step.
- The Staff & the Treble Clef — Handout 351: how to read the five-line staff, for when you work from standard notation alongside TAB.
Finding your way with a teacher
The power chord is a compact, beginner-friendly form, but how you hold the shape matters. Your teacher can watch that the fretting fingers are just behind the fret wire, that no neighboring string is accidentally silenced or buzzed, and that your hand lifts cleanly between chords. If you want that kind of live feedback, a Tissimo guitar teacher can walk through the shape with you in a one-on-one lesson.
Sources
Read this article online: https://tissimo.co/articles/guitar-power-chords-movable-root-fifth

Comments